Face-Out; Setting Up And Enabling Face-Out - CyberLink YouCam User Manual

CyberLink YouCam
3. Select OK to save your changes.

Face-out

The Face-out* utility in CyberLink YouCam can auto protect your computer when
your face exits the webcam image, by locking it, or by making it hibernate or
sleep.
Note: * this feature is not available in some versions of CyberLink YouCam.

Setting Up and Enabling Face-out

To set up and enable Face-out, do this:
1. Do either of the following to access the Face-out window:
select the Utilities tab of the YouCam launcher, and then select Face-out.
select Utilities > Face-out from the drop-down menu that appears at the top
of most CyberLink YouCam windows.
2. You will be prompted to enter your current Windows password. Enter it in
the field provided, and then select OK. Be sure to select the Remember my
password option so that you won't be prompted to enter it again.
3. Place your face in the center of the webcam image frame, and then select
the Capture button. CyberLink YouCam will detect your face and capture an
image it will use for Face-out.
Note: if you previously enabled Face Login, CyberLink YouCam will use the same
image. Select the Show all faces link if you want to view and remove any of the
captured images of your face.
4. If required, select the Capture More button to capture additional images of
your face. CyberLink YouCam can capture up to 40 different images of your
face. The more images you capture, the more accurate the face detection is
when using the Face-out feature.
5. Set the features of Face-out you want to enable as follows:
Enable Face-out when I am not in front of the PC: select this feature if you
want CyberLink YouCam to display a pop-up window when your face leaves
your webcam's image. After the specified duration, CyberLink YouCam will
perform the specified action to protect your computer.
60