Capture & Snapshot Settings - CyberLink YouCam User Manual

CyberLink YouCam
have audio.
Note: you need to have a microphone connected to your computer or webcam to
capture webcam video with audio.
Enable video zoom: select this option if you want to zoom in on the webcam
video image. Once selected, the following features are enabled:
Auto face detection: select to have CyberLink YouCam detect your face
and auto zoom in slightly. Using this feature enables the program to
track and follow your face as it moves around the webcam image.
Manual zoom: use the slider to manually zoom (up to 4x) in on a specific
part of the webcam video. Drag the boxed area to the area of the video
you want the camera to focus on.
Capture & Snapshot Settings
In the settings window, select the
Capture folder: set the folder where captured photos and videos are saved.
To change the capture folder, select the
folder location.
Countdown before capture: select this option to enable a three second
countdown before CyberLink YouCam begins capturing photo snapshots
or videos.
Display timestamp: select this option to display a timestamp on the
webcam image. Once enabled, select the desired timestamp display
format from the drop-down list.
Capture format: select the file format for captured video from the drop-
down list. If your computer supports Intel Quick Sync Video Technology, the
HD H.264 (MP4) format video format is available.
Capture quality: select the quality of the captured video from the drop-down
list. The higher the quality selected, the larger the file size created.
Snapshot format: select the photo file format of the captured snapshots
from the drop-down menu.
Shutter speed: select the rate of exposure, or the quickness the webcam
12
tab. The available options are as follows:
button and then a new