Panoramas; Creating A Panorma Image - CyberLink YouCam User Manual

Chapter 7:

Panoramas

In CyberLink YouCam you can create a panorama* image by taking a series of
photos snapshots with your webcam.
Note: * this feature is not available in some versions of CyberLink YouCam.
To open the Panorama window, do any of the following:
select the Camera tab of the YouCam launcher, and then select Panorama.
select Camera > Panorama from the drop-down menu that appears at the
top of most CyberLink YouCam windows.
in the Capture window, select the
then select Panorama.
in full screen mode, select the

Creating a Panorma Image

To create a panorama image with your webcam, do this:
Note: if required, select the
The grid can help you align the photo snapshots for the panorama and ensure they
are straight.
1. Select the screen to hide the panorama tips.
2. Position the webcam where you want to take the first photo snapshot to use
in the panorama, and then select the
Note: if you want to retake a photo in the panorama, click the
the last photo taken.
3. Move the webcam to the next position, and then select the
again. If the photo snapshot was taken, it will be added to the stitch result
area.
Note: the photo snapshots for the panorama should be taken from left to right.
button in the capture controls, and
button, and then Panorama.
button at the top of the screen to display the grid.
button.
Panoramas
button to remove
button
41