Selecting A Desired Music File; Finding A Desired Music File - Toyota Aygo Connect Multimedia Owner's Manual

TACM2010_EN.book Page 22 Tuesday, October 5, 2010 3:44 PM
22
AUDIO OPERATIONS
IMPORTANT
● When a USB memory device is attached,
the receiver may take a time to scan and
read the file tag information. To shorten
this scan time, try to store only MP3 files in
the USB memory and to reduce the
number of folders in the USB memory.
● Please wait until all of the songs are
detected to select USB mode.
● After engine start, radio will select the
previously selected radio mode.
● You cannot connect a USB portable audio
player/USB memory to this unit via a USB
hub. Not all multimedia portable devices
are compatible.
● Navigation instructions mute all speakers.
Connect the USB memory to the USB
1
connector.
Press [CD/AUX] button on Radio to
2
select audio mode. Radio will select
audio mode after CD and/or AUX
depending on their connectivity.
Press [MODE] button on the dock to
3
toggle between USB and iPod if both
of them are connected.
● Playback will begin.
Selecting a Desired
Music File
You can select a track you want to play.
Press the [
1 TRACK
button.
● Track Up:
Advances to the next file.
● Track Down:
Returns to the previous file.
● The selected track (file) will be played.
Finding a Desired Music
File
CAUTION
● Before disconnecting the USB memory
from this receiver, always switch the
display to the audio mode screen and
touch . Loss of data may result if this
procedure is not followed.
● If you disconnect the USB memory or the
PND from this receiver when a music file of
USB memory is being played, the radio
returns to the previous operation mode.
● For your safety you are advised not to
operate the ,
buttons when your car is running.
1
Touch .
Select
] or [ ]
TRACK
, and