Status Lights; Power Light; Wi-Fi Connectivity Led - Advent AW10 Extended User Manual

Troubleshooting

Status lights

Power light

Wi-Fi connectivity LED

56
The status lights indicate the condition of the printer. There are two status lights on
the printer: one that indicates power, the other indicates Wi-Fi status.
Power light
Off
Blinking
On
Wi-Fi connectivity LED
Off
Blinks continuously
Blinks intermittently
On
adventprintersupport.custhelp.com
What it means
• The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the
back of the printer and into an electrical outlet, and
that the electrical outlet has power.
• The printer is busy.
– Wait for the printer to finish the task.
• The printer is ready.
What it means
The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
The Wi-Fi radio is turned on, and the printer is searching for
available wireless networks within range.
The Wi-Fi radio is turned on and the printer cannot find any
available wireless networks within range, or the Wi-Fi radio
connection has been interrupted, or is too weak to send
signals to and from the printer.
To find and connect to an available wireless network within
range, press OK , turn the Wi-Fi radio off, and run the WiFi
Setup Wizard (see Connecting to a wireless network,
page 5).
The Wi-Fi radio is turned on, and there is a working
connection between the printer and a wireless network.