Table of Contents
Advertisement
Networking Your Printer
6
The Wi-Fi connectivity LED blinks as the printer searches for available wireless
networks within range, then displays the list in order of signal strength. For
example:
If there are more networks than can be shown on the LCD, a
symbol appears in the bottom right of the display. If you don't see your network
in the list, or if you want to change your network, select Rescan for Wireless
Networks, then press OK.
4. If the name of your network is:
Listed
Press
to select your
network, then press OK
5. If your network has security enabled, use the LCD keyboard (see
keyboard, page
8) to enter your security string.
6. When the confirmation message appears, press OK .
If the printer is successfully connected, the Wi-Fi connectivity LED will stop
blinking and stay on steadily.
If you are unable to connect your printer, go to
adventprintersupport.custhelp.com/app/go/inkjetnetworking
information.
7. If you haven't yet installed the ADVENT All-in-One Printer Software, go to
adventprintersupport.custhelp.com/app/go/downloads
on-screen instructions to install the software.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, ADVENT-AW10+0072).
8. Enable the firewall that you disabled earlier.
adventprintersupport.custhelp.com
Not listed
Make sure your wireless router is turned on and
within range. If your wireless router does not
.
broadcast its SSID (network name):
1. Press
to select Unlisted Network, then press
OK.
2. Use the LCD keyboard (see
keyboard, page
3. Select WEP or WPA/WPA2 as required for your
network's security setup, then press OK.
(page down)
Using the LCD
8) to enter your network name.
Using the LCD
for more
and follow the
Hide quick links:
Advertisement
Table of Contents
