Table of Contents
Advertisement
press "OK", you will see a web screen to prompt you the configurations save successfully. Please refer
to section 4.2.7 for the information of this screen.
4.2.5
L2TP xDSL
Select L2TP if your ISP requires the L2TP protocol to connect to the Internet. Your ISP should provide
all the information required in this section.
Parameter
Description
Obtain an IP address
Select it if the ISP requires you to obtain an IP address by DHCP automatically.
If your ISP requires a Host Name, type in the host name provided by your ISP;
Host Name
otherwise, just leave it blank.
To connect to the Internet, your ISP will require a MAC address from your PC.
Type in this MAC address in this section or use the "Clone MAC Address"
MAC Address
button to replace the WAN port MAC address with the MAC address of that PC.
To find out the PC's MAC address, see Appendix A. (also see Glossary for an
explanation on MAC address.
Use the following IP
Select it if the ISP provides you a static IP to connect to the L2TP server.
address
This is the IP address that your ISP has given you to establish a L2TP
IP Address
connection.
- 14 -
Advertisement
Table of Contents
