Disclaimer - WeatherBug Weather Station Installation, Operation And Maintenance Manual

DISCLAIMER

The procedures, methods and hardware outlined in this manual are intended to provide
general guidelines for installing a WeatherBug Weather Station. Individual sites often have
unique requirements that require materials and specifications that are beyond the scope of
this manual.
All procedures, methods and hardware used to install a WeatherBug Weather Station must
conform to all applicable building codes (local, state and national). Installation
subcontractors are responsible for complying with all applicable codes. Buyer- and/or
installer-provided hardware must be equivalent or better (according to industry standards)
than that specified in the WeatherBug installation manual.
The buyer/installer is responsible for any damage caused by installation of the WeatherBug
weather station. Furthermore, the buyer/installer is responsible for damage caused as a
result of improper or faulty installation.
THINK SAFETY FIRST! READ THE GETTING STARTED
SECTION OF THIS MANUAL FOR HELPFUL SAFETY TIPS.
Special Note to Buyer/Installer:
Contact WeatherBug
TM
installation is complete. WeatherBug
verify proper operation. Call WeatherBug
communications are not available at the time of installation.
WeatherBug
AWS-WXN-60003.001
Weather Station Manual
Technical Support as soon as your WeatherBug
must remotely access your weather station's data to
TM
Technical Support even if remote
TM
Weather Station Technical Support:
TM
800-624-4205
support@aws.com
Monday - Thursday -- 8:00am-7:00pm EST
Friday -- 8:00am-5:00pm EST
Version 1.0, Release 5
- 3 -
weather station
TM
November 2004