Decware SE84C+ Owner's Manual page 8

OWNERS MANUAL
MANUAL NO. 01
BREAK IN
During the first few hours or days with your amplifier you will no doubt wonder
about break-in, if for no other reason than hearing about it constantly every
time you read about amplifiers.
If you're new to tube gear the amp will sound so good right out of the box that
you will have a hard time worrying about break-in, so don't.
If you've been around the block once or twice, then the fastest way to break in
the amp to a point where the sound stage and focus doesn't change back and forth
from good to bad is this:
5 hours on and playing music at a normal level followed by 5 hours off.
Repeat this 5 times.
in the coupling caps and you can then expect the amp to bloom in the very
near future.
Beyond this, the amplifier will continue to improve and become more refined over
the next 200 hours or so.
like fine wine, so as the years go by your amplifier continues to sound sweeter
and sweeter.
WEAK LINKS
Please, if even only for an evening, lift some of the handicaps you've placed on
your new amplifier so you can hear more of it's inner magic.
your amplifier is limited by the weakest link in your system.
your source component and interconnect cables is of paramount importance because
you now have an amplifier so good it will never become the weak link.
spend enough money on a source to hear how good the amplifier actually is, so
each time you upgrade your source the amp will blow your mind.
MORE INFORMATION ON THIS PRODUCT CAN BE FOUND ON
DECWARE
START UP CONTINUED
This process will speed the seating of the dielectric
After that the output transformers season with age,
tm
High Fidelity Engineering Co.
REV. DATE: 2/2008
The fidelity of
The quality of
You can't
www.decware.com