Philips 107T7 Service Manual page 67

17" CDT Color Monitor
5.9 Plastics flammability
•
All Plastics expect Base / Pedestal to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg;
UL94-V0 is OK).
•
Base / Pedestal to be Flame Retardant UL 94-HB (ABS).
•
All major plastic parts (bezel, back cover) need to be molded from same resin. Base / Pedestal otherwise
specified.
5.10 Texture/Glossing of housing
•
The texture area and texture no. should follow Philips make-up sheet.
•
The exterior surfaces shall have a uniform texture.
•
Philips must approve the mold texturing.
•
Detail document for texture refer to UAN-D249.
•
< = 20 gloss units
5.11 Tilt/Swivel Base ranges
•
Tilt Range -
•
Swivel Range -
•
Base should not break plastic when attempting to rotate it past the stops.
5.12 Movement of unit with base
•
Base must have non-marring, non-staining feet.
•
Unit must tilt up and down with no "Stick / Slip".
•
Base must provide sufficient friction to hold unit in desired position after adjusting tilt.
5.13 Label
•
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
5.14 Product Dimensions / Weight
•
Unit dimension (with stand) -
•
Packed unit dimension (carton) -
•
Net weight -
Up = 14° ± 1°, Down = 3.5° ± 1°
± 90°
397mm (W) x 382mm (H) x 423.5mm (D)
460mm (W) x 450mm (H) x 526mm (D) for China, India
446mm (W) x 420mm (H) x 475mm (D) for other regions
13.5 kg
67
107T7