Philips 107T7 Service Manual page 64

17" CDT Color Monitor
Phosphor Dot Pitch
Phosphor Type
Light Transmission rate
Surface Treatment
Surface Resistance
CRT net Weight
3.2 Display image / Geometric distortions
•
Nominal display size -
•
Size control range -
•
Raster centering -
•
Image centering -
•
Position control range -
•
Line straightness -
•
Image tilt -
•
Dynamic EHT size regulation -
•
Static EHT size regulation -
•
Image size stability -
•
Linearity [(max–min)/mean] -
•
Convergence -
•
Jitter -
annoying level by visual)
RV: xxx Ω
0.25mm
P22, medium short persistence
Anti glare/Anti static
306mm x 230mm ± 4mm for all preset modes.
306mm x 230mm ± 10mm for preload modes.
Nominal total size: -15mm to full scan.
< 4mm for prime mode.
< 5mm for all preset modes.
< 12mm for preload modes.
H: ± 10mm minimum, V: ± 8mm minimum.
Border overall distortion < 2.0mm for all preset modes, the
waviness of any vertical or horizontal should be less than 1.0mm
over a 50mm distance.
< 1.0mm (each side).
< 1.0mm (each side).
< 1.5mm (each side).
< 1.0% (110Vac ~ 240Vac) as a function of supply voltage.
< 1.0% (5 ~ 40ºC) as a function of temperature.
Pattern: 12 x 9 blocks
Prime modes: 1024x768@75, 1024x768@85.
Overall H&V < 10% (prime modes).
Adjacent H&V < 6% (prime modes).
Overall H&V < 14% (other modes).
Adjacent H&V < 7% (other modes).
Zone A < 0.25mm, Zone B < 0.35mm.
Zone B < 0.4mm (for modes < 50kHz).
64
RV: xxx Ω
0.25mm
P22, medium short persistence
Anti glare/Anti static
< 0.1mm. (No
107T7