Place Your Speakers; Place The Receiver - Harman Kardon AVR 1700 Quick Setup Manual

AVR
Introduction
Thank you for choosing a Harman Kardon product!
This quick-start guide contains all the information you need to connect and set up your
new Harman Kardon audio/video receiver (AVR).
To conserve our natural resources, your AVR does not include a printed owner's manual.
An owner's manual containing complete information about operating all of your new
AVR's features is available at our Web site. Go to www.harmankardon.com and download
the AVR 1700, AVR 170, AVR 170/230C Owner's Manual.

Place the Receiver

• Place the AVR on a firm and level surface. Be certain that the surface and any mounting
hardware can support the AVR's weight.
• Provide proper space above and below the AVR for ventilation. Recommended clearance
distances are 30cm above the unit, 30cm behind the unit and 30cm on each side of the unit.
• If you install the AVR in a cabinet or other enclosed area, provide cooling air within the cabinet.
Under some circumstances, a fan may be required.
• Do not obstruct the ventilation slots on the top of the AVR or place objects directly over them.
• Do not place the AVR directly on a carpeted surface.
• Do not place the AVR in moist or humid locations, in extremely hot or cold locations, in areas
near heaters or heat registers, or in direct sunlight.
Connections
CAUTION: Before making any connections to the AVR, ensure that the AVR's AC cord
is unplugged from the receiver and the AC outlet. Making connections with the AVR
plugged in and turned on could damage the speakers.
Network
Connector
Radio Antenna
Connectors
Analog Audio
Input/Output
Connectors
Subwoofer
Connector
2
HDMI Input
Connectors
IR In & Composite
12V Trigger Video
Connectors Connectors
Speaker
Connectors
Rear-Panel Connectors
Introduction, Speaker Placement and Connection

Place Your Speakers

Determine the locations for your system's speakers according to their manufacturer's
directions and the layout of your listening room. Use the illustrations below as a guide
for 5.1-channel systems.
TV
C
FL
SL
Speaker Positioning for 5.1-Channel Systems
For more detailed speaker placement information, download the complete AVR 1700,
AVR 170, AVR 170/230C Owner's Manual from www.harmankardon.com.
HDMI Out
Connector
Digital Audio
Input Connectors
Main Power
Switch
RS-232
Connector
SUB
FR
SR
AC Input
Connector