Download Print this page

Freewire Operation - Black & Decker freewire Instruction Manual

Master remote control
Hide thumbs

Advertisement

622715-00 Master Remote manual
FREEWIRE OPERATION, cont.
ZONES
Open door to the MASTER REMOTE to
expose the colored dial shown below.
The numbers and colors on the MASTER
REMOTE dial match the numbers and
colors on the MESSENGER HUB and
other UNITS.
The colors on the dial for the UNIT
CODE can be used to divide your home
into ZONES with up to 3 dedicated UNIT
CODES per ZONE (except red which
only has one UNIT CODE.) (e.g. Green =
Living Room)
The numbers are used to differentiate
one UNIT from another in each ZONE.
REFERENCE LABEL SET UP
For your convenience, a blank reference
label is located on the back of your
MASTER REMOTE. Write your own
customized applications on this label.
Example: Red UNIT CODES have been
selected for the BULB RECEIVER in the
Entrance.
Gray UNIT CODES have been selected
for the UNITS in the Dining Room.
Green UNIT CODES have been selected
for the UNITS in the Living Room etc.
2/4/04
9:18 AM
Page 13
USING FREEWIRE
FUNCTIONALITY
Step 1:
Set the dial on your MASTER REMOTE
to the same UNIT CODE that you
selected on the MESSENGER HUB.
Step 2:
Each of the 3 individual codes on that
color can be turned on and off
individually, using the 3 white ON/OFF
buttons located just above the dial.
Example: Blue 11 - Controlled by the top
row, left switch
Blue 12 - Controlled by the top row,
center switch
Blue 13 - Controlled by the top row, right
switch.
The small round ON button and OFF
buttons shown below let you turn on or
off ALL UNITS set to that color.
You should now be able to turn the lamp
on and off with the corresponding button
on the MASTER REMOTE.
Note: You may have to press and
momentarily hold the button before it
activates.
13

Advertisement

loading

  Also See for Black & Decker freewire

  Related Manuals for Black & Decker freewire

  Related Content for Black & Decker freewire

This manual is also suitable for:

Freewire fwmr