Pliance - Neue IDSH601W User Manual

German
degrees
(°dH)
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and
electronically.
Manual adjustment
1
Electronic adjustment
1. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode, re-
fer to "Setting and starting a programme".
2. Press and hold the programme button until the indi-
cator
tor comes on.
6
Water hardness
French
degrees
(°fH)
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
2
Turn the water hardness
dial to the position 1 or 2.
starts to flash and the indica-
mmol/l Clarke
degrees
7.6 - 8.3 53 - 57
6.5 - 7.5 46 - 52
5.1 - 6.4 36 - 45
4.0 - 5.0 28 - 35
3.3 - 3.9 23 - 27
2.6 - 3.2 18 - 22
1.9 - 2.5 13 - 17
0.7 - 1.8 5 - 12
< 0.7 < 5
3. Wait until the indicator
end indicator starts to flash (the indicator
4. Press the programme button.
• The end indicator flashes intermittently. The
number of flashes shows the current level of the
water softener, e.g. 5 flashes + pause + 5 flash-
es = level 5.
5. To adjust the level of the water softener, press the
programme button. Each time you press the pro-
gramme button you go to the next level.
6. Press the on/off button to deactivate the appliance
and to confirm the setting.
Filling the salt container
Caution! Water and salt can come out from the
salt container when you fill it. Risk of corrosion. To
prevent it, after you fill the salt container, start a
programme.
Water softener
adjustment
Manual
1)
2
1)
2
1)
2
1)
2
1)
2
1
1
1
2)
1
goes off and the
continues to flash).
Electron-
ic
9
8
7
6
1)
5
4
3
2
2)
1