Table of Contents
Advertisement
GETTING STARTED
Double-click left button on one camera to be full screen display. Double-click again to
return to the previous screen display.
Click right button to show the control
bar at the bottom of the screen as Fig
4-1 main menu toolbar
Click right mouse again to hide the
control bar.
In Setup:
Click left button to enter. Click right button to cancel setup, or return to the previous
screen.
If you want to input values, move cursor to the blank and click. An input window will
appear as shown in Fig 2-7. It supports numbers, letters and symbols.
Users can change some values by the wheel, such as time. Move cursor onto the
value, and roll the wheel when the value blinks.
Also supports mouse drag. I.e. Set motion detection area: click customized, hold left
button and drag to set motion detection area. Set schedule: hold left button and drag
to set schedule time
In playback:
Click left button to choose the options. Click right button to return to live view.
In backup:
Click left button to choose the options. Click right button to return to previous picture.
In PTZ control:
Click left button to choose the buttons to control the PTZ. Click right button to return to
live view.
Notice: Mouse is the default tool for all the operations below unless
otherwise noted.
Fig 2-7 Numbers and Letters Input Window
13
User Manual
Advertisement
Table of Contents
