Go To Table Of Contents - Turtle Beach Ear force ATLAS User Manual

Setup and Connections: Xbox 360 Consoles
Xbox 360 Original and Slim HDMI® Connections
1. Insert the microphone boom plug into the jack on the left earcup of the headset.
USB
2. Insert the cable from your headset into the headset jack of the In-Line Amplifier.
3. Insert the Xbox 360 Audio Adapter, sold separately, into the multi-pin connector on the Xbox 360 console.
4. Insert the Red and White RCA plugs of the RCA Splitter Cable, into the Red and White RCA jacks of
the Xbox 360 Audio Adapter.
5. Insert the 3.5 mm plug from the In-Line Amplifier into the 3.5 mm jack of RCA Splitter Cable.
6. Insert the L-shaped 2.5 mm plug of the Xbox 360 Chat Cable into the chat jack of the Xbox 360
controller (not included).
7. Insert the straight 2.5 mm plug of the Xbox 360 Chat Cable into the Xbox 360 Chat Jack of the In-Line
Amplifier.
8. Insert the USB plug of the In-Line Amplifier into a USB port of the Xbox 360 console.
NOTE: For reliable sound, confirm that all connections are firmly inserted.
* Xbox 360 Original and Slim models require an Xbox 360 Audio Adapter, sold separately, when used with an HDMI
connection. This adapter is available from turtlebeach.com.
* As an alternative, if your television has available RCA Audio Output jacks, you can use these to supply sound from the
television to the headset. (Only use the television's Audio Output jacks. Audio Input jacks will not send sound to your
headset.)
HDMI
HDMI
Xbox 360 Audio Adapter*
®
USB

Go to Table of Contents

D
E
B
A
1
A
10