Trunking System Controls; Using The Failsoft System; Going Out Of Range - Motorola APX 7000 User Manual

Trunking System Controls



Using the Failsoft System

The failsoft system ensures continuous radio communications
during a trunked system failure. If a trunking system fails
completely, the radio goes into failsoft operation and
automatically switches to its failsoft channel.
Procedure:
1
During failsoft operation, your radio transmits and receives
in conventional operation on a predetermined frequency.
2
A medium-pitched tone sounds every 10 seconds and the
display shows FAILSOFT.
When the trunking system returns to normal operation, your
radio automatically leaves failsoft operation and returns to
trunked operation.
48
English


Going Out of Range

When your radio goes out of the range of the system, it can no
longer lock onto a control channel.
Procedure:
1
A low-pitched tone sounds.
AND/OR
The display shows the currently selected zone/channel
combination and OUT RNG.
2
Your radio remains in this out-of-range condition until:
It locks onto a control channel.
OR
It locks onto a failsoft channel.
OR
It is turned off.