Appendix; Troubleshooting; Technical Data - Silvercrest SVG 2.0 A1 User Manual

SilverCrest USB 2.0 Video Grabber SVG 2.0 A1

Appendix

Troubleshooting

The Video Grabber is connected but not recognised by the operating system.
Check all the connections.
Are you using a supported operating system?
New USB devices have been recognised and drivers must be installed.
When a USB device is connected to a new port it receives a new ID.
This normally requires driver installation, even if the driver is already
installed.
The video received over the S-Video cable is in black and white.
The playback source must be switched to S-Video.
Error message saying that the video is protected.
The copyright system has been activated. This material cannot be
copied.

Technical Data

Video input
Audio input
Video format
Video encoding
Picture format
Interface
Dimensions
Weight
RCA video jack (yellow) / S-Video jack (black)
RCA audio jacks (red/white)
PAL, NTSC
MPEG 720x576 Pixel
BMP, JPG
USB 2.0
73 x 30 x 11 mm (L x W x H)
14 g
English
11