Vesa Standard Tv Mounts - 32/42 Inches - RCA J22HE820 User Manual

Chapter 1: Connections and Setup
You must use a UL listed wall mount or the DTI Services, LLC DTI-006 Wall Mount Bracket whenever Wall
Mounting this television.
A skilled person should be contacted to perform the installation of the television and wall mount.
Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the
mount must be able to support, minimum screen size that the mount must be able to support, instructions
furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support
the type of television under consideration.

Vesa Standard TV Mounts - 32/42 inches

The following examples are VESA Standard wall mounts. Since there are numerous types of stands and
mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that will
be used to mount the TV.
General Guidelines: Choosing a location for
installing a VESA Standard Mount
A
B
Model VESA (A*B)
J32HE720 200 X 100mm
J42HE820 400 X 400mm
Be sure the style of stand selected is capable of
supporting the weight of the TV.
If the mount will be on a wall, a typical wooden
stud behind the wall board would be the pre-
ferred choice for a location to attach the wall
mount. The wall mount location chosen should be
appropriate for drilling holes and have available
the required power source as well as
antenna/cable and other equipment leads.
For pedestal-type mounts, a sturdy surface on a
desk or other similar flat table-like surface would
be the appropriate location for mounting a
pedestal-style TV stand. (Some stands are portable
and can be moved from one location to another.)
Be sure all safety considerations are followed.
Most stands are designed so that the wiring would
be threaded through the stand itself or a loop-
through style clamp so that the wiring is neatly
bunched and not strung in such a way as to create
a potential hazard to the user.
Caution: Tightening wall mount screws that are too long could cause damage to the internal components of
this television.
Use M5 X "L" bolts to mount LED. ("L" = Wall Mount bracket thickness + 0.5 inch or below for
J32HE720)
Use M6 X "L" bolts to mount LED. ("L" = Wall Mount bracket thickness + 0.3 inch or below for
J42HE820)
Note
- Image shown may differ from your TV.
- Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall
Mounting Instruction Guide.
18
Typical Wall Standard Type Mount with Swivel Bracket
Chapter 1