JBL CSM 14 Operation Manual page 14

Figure 2.2.3 Rack Mounting Two Half-rack Mixers
Solution A: Rack Mounting Two Half-rack Mixers
To install two half-rack width units in your cabinet system, refer to Figure 2.2.3 and
follow the steps below:
1. Align two modules side by side and upside down with the front panel towards
the same direction.
2. Connect them with the flat bracket using the screws provided.
3. Attach the front angle brackets to each side of the front of the assembly using
the screws provided.
4. Install the assembly into the cabinet using the rack mount screws through the
front angle brackets. For details of installation in the chassis of the cabinet, refer
to the user guide of your cabinet.
14