Important Safety Instructions; Setup; Unpacking Your Unit; Installing Your Unit - JBL CSM 14 Operation Manual

2.0 Setup

2.1 Unpacking Your Unit

Please unpack and inspect your unit for any damage that may have occurred during
transit. If damage is found, notify the transportation company immediately. Only you
can initiate a claim for shipping damage. We will be happy to help as needed. Save
the shipping carton as evidence of damage for the shipper's inspection.
We also recommend that you save all packing materials so you will have them if you
ever need to transport the unit. Never ship the unit without the factory pack.
WARNING: Before you start to set up your unit, make sure you read and observe the
Important Safety Instructions found at the beginning of this manual.

2.2 Installing Your Unit

CAUTION: Before you begin, make sure your unit is disconnected from the power
source and all level controls turned completely down (counterclockwise).
To install the unit, you can use one of the following approaches:
• Rack mount the unit with the rack mounting kit, see Figure 2.2.2.
• Place a single unit on a surface with 12 inches of air space around the unit
for convection cooling. Rubber feet are included and can be attached onto
the underside of the chassis. For product dimensions, see Figure 2.2.1.
12