General Information - Electrolux Diva Service Manual

6.2 General information

l
Equipment in the panel area
(see description page B 1)
Possible equipment
w Separate ON/OFF switch S0 without optical confirmation
w 6 keys S1 to S6 to select programs or options with the corresponding LEDs
All keys are free and can be programmed without any restriction by the programming of
the appliance variant.
w 2.5-digit display and 3 LEDs (LD10 to LD12)
Absolutely necessary minimum equipment:
Keys S0 (ON/OFF) and the first 3 keys S1 to S3 with the corresponding LEDs and display.
The keys S1 to S3 are absolutely necessary to select all customer respectively service
functions, such as setting of hardness!
l
Variant-depending existing equipment:
w Indication of start time via 2.5-digit display
Indication between 1 and 19 hours (in steps of 1h)
w Indication of remaining run time via 2.5-digit display
maximum indication of run time "199"
w LED display for salt
w LED display for rinse-aid
w LED display for water tap closed
w LED dispaly for END possible
l
Functions which can be adjusted by the customer via the control
panel:
(see description page B 11-13)
w Indication and alteration of water hardness. Indication via display.
w Activation/deactivation of rinse-aid addition. Indication via display.
w Activation/deactivation of signal sound "END". Indication via display.
l
Miscellaneous:
w regeneration on need
w manufacturing test routine
w several service functions (fault memory, single actuator selection, LED test)
w appliance design for max. energy label AAA
w alternatively with and without fan drying
w aqua control system in different versions
depending on electrical and mechanical components and the corresponding variant programming
l
Possible selectable program options:
w start-time preselection
w half load "small quantity" as automatic system or with key
w additional washing cycle
w 3 in 1 (special tablet program)
w senitize
21