Troubleshooting; Fcc Information - Brookstone Rechargeable Backup Battery Owner's Manual

TroUbleshooTinG

problem poSSIble caUSe
The Backup
Product connected has
Battery will not a high startup surge.
operate and the
power light is off. Unit is off.
The Backup Battery
has overheated and has
automatically shut off.
The Backup The products connected
Battery will not
are rated at more than
operate but the the Backup Battery's
power light is on.
continuous power rating.
The USB protection fuse
has tripped. (resets
automatically)
11
629162_INS_RchrgblBckUpBttry_Size:5"Wx4.75"H_Output:100%_Prints:1/1,Blk
SolUtIon
Product exceeds Backup
Battery's surge capability, do
not use.
Press POWER button to turn
Backup Battery on.
Unplug all devices connected
to the Backup Battery. Allow
the Backup Battery to cool for
15 minutes. Move the Backup
Battery to a cooler place,
making sure nothing is covering
its ventilation holes, and power
up again by pressing the
POWER button.
Unplug the product that is causing
the overload. Wait 5 minutes to
allow the fuse to cool down and
auto reset. Be sure to use only
products that are rated lower than
the Backup Battery's continuous
power rating.
4. Use only the provided AC charger adapter to charge the Backup Battery.
5. The cells inside the Backup Battery contain toxic substances. Do not use
the Backup Battery if the casing is broken or if it emits an unusual odor,
produces excessive heat, or leaks.
6. Avoid contact with any substance that leaks from the Backup Battery.
7. Do not attempt to open the Backup Battery, there are no user serviceable
parts inside.

fcc informaTion

This equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
4