Operation - DeltaLab Digital Delay DD1 Owner's Manual

1. Input - Connect your instrument to input jack. The circuit is turned on
when a cable is inserted.
2. Time - adjusts speed of echo repeats.
3. Repeats - adjusts how many times the echoes are heard.
4. Level - adjusts the amount of effect heard.
5. True Bypass Switch - Engages and disengages the effect.
6. LED indicator - indicator is on when effect is engaged. if LED is dim or
does not light when effect is engaged, replace the battery.
7. Out A (Mono) - Provides a single effected signal output.
8. Out B - Provides a second effected signal for stereo output with Out a.
9. External DC power jack - Plug an external 9 Volt wall adapter here.
when using an external adapter, the battery is switched off.

OPERATION

www .deltalabeffects .com
5