1. Manuals
  2. Brands
  3. HTC Manuals
  4. Cell Phone
  5. NIKI160
  6. User manual

HTC NIKI160 User Manual

Touch phone
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Touch Phone
User Manual
www.htc.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NIKI160 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HTC NIKI160

Summary of Contents for HTC NIKI160

  • Page 1 Touch Phone User Manual www.htc.com...

  • Page 2: Please Read Before Proceeding

    INTELLECTUAL PROPERTY RIGHT INFORMATION Copyright © 2007 High Tech Computer Corp. All Rights Reserved. , ExtUSB, HTC Touch, HTC Care, Touch Dual, and TouchFLO are trademarks and/or service marks of High Tech Computer Corp. Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile,...
  • Page 3 All other company, product and service names mentioned herein are trademarks, registered trademarks or service marks of their respective owners. HTC shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from furnishing this material.

  • Page 4: Important Health Information And Safety Precautions

    Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT...
  • Page 5 SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company.
  • Page 6 NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1 • Earphone, manufactured by HTC, Model HS S200 SAFETY IN AIRCRAFT Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board...
  • Page 7 EXPLOSIVE ATMOSPHERES When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
  • Page 8 NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normal-use position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.

  • Page 9: General Precautions

    General Precautions • Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider. • Damage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions: •...
  • Page 10 • Use product with approved equipment This product should be used only with personal computers and options identified as suitable for use with your equipment. • Adjust the volume Turn down the volume before using headphones or other audio devices. •...

  • Page 11: Table Of Contents

    1.3 Starting Up ...23 1.4 The Today Screen ...26 1.5 The Start Menu ...27 1.6 Quick Menu ...28 1.7 QuickTasks ...28 1.8 HTC Home™ ...29 1.9 TouchFLO™ ...34 1.10 Status Icons ...41 1.11 Programs ...43 1.12 Settings ...46 Chapter 2 Entering and Searching Information 2.1 Entering Information ...52...
  • Page 12 Chapter 3 Using Phone Features 3.1 Using the Phone ...64 3.2 Making a Call ...66 3.3 Receiving a Call ...69 3.4 Making a Video Call ...72 3.5 Receiving a Video Call ...76 3.6 Smart Dial ...76 3.7 Additional Dialing Information ...78 3.8 Setting Up Bluetooth SIM Access for Car Kit Phones ...78 Chapter 4 Setting Up Your Device 4.1 Basic Settings ...82...
  • Page 13 Chapter 7 Exchanging Messages 7.1 Messaging ...114 7.2 Text Messages ...115 7.3 MMS ...117 7.4 Types of E-mail Accounts ...121 7.5 E-mail Setup Wizard ...122 7.6 Using E-mail ...125 Chapter 8 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing Your Device with the Exchange Server ...132 8.2 Working With Company E-mails ...133 8.3 Managing Meeting Requests ...137 8.4 Finding Contacts in the Company Directory ...139...
  • Page 14 Chapter 11 Experiencing Multimedia 11.1 Camera ...172 11.2 Camera Album ...183 11.3 Pictures & Videos ...187 11.4 Windows Media® Player Mobile ...189 11.5 Streaming Media ...194 11.6 Flash Lite Player ...196 11.7 Audio Manager ...197 11.8 Audio Booster ...201 Chapter 12 Managing Your Device 12.1 Adding and Removing Programs ...206 12.2 Using Task Manager ...206 12.3 Resetting Your Device ...208...

  • Page 15: Chapter 1 Getting Started

    1.1 Getting to Know Your Device and Accessories 1.2 Installing the USIM/SIM Card, Battery, and Storage Card 1.3 Starting Up 1.4 The Today Screen 1.5 The Start Menu 1.6 Quick Menu 1.7 QuickTasks 1.8 HTC Home™ 1.9 TouchFLO™ 1.10 Status Icons 1.11 Programs 1.12 Settings...

  • Page 16: Getting To Know Your Device And Accessories

    1.1 Getting to Know Your Device and Accessories Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Left panel Volume Buttons •...

  • Page 17: Front Panel

    Front panel Earpiece Listen to a phone call from here. TALK Press to answer an incoming call or dial a number. 20-key QWERTY keyboard Slide up the front panel of the device to reveal the keyboard. Use to dial phone numbers and enter information.

  • Page 18: Bottom Panel

    Back panel 2 Megapixel Camera See Chapter 11 for details. Back Cover Remove to install the SIM card and battery. Bottom panel Speaker Self-portrait Mirror Use it when taking self- portrait shots. Microphone...
  • Page 19 Accessories Screen Protector No. Accessory Battery Screen protector Stereo headset AC adapter USB sync cable Extra stylus User manual and ReadMeFirst Pouch Getting Started and Applications discs Function Insert into the device before turning it on. Stick on the touch screen to prevent scratches. Provides a volume control slider and a Send/End button.

  • Page 20: Installing The Usim/Sim Card, Battery, And Storage Card

    1.2 Installing the USIM/SIM Card, Battery, and Storage Card Always turn off your device before installing or removing the USIM/SIM card or battery. The USIM/SIM card contains your phone number, service details, and phonebook/message memory. Your device supports both 1.8V and 3V SIM cards.
  • Page 21 To remove the back cover Before installing the USIM/SIM card or battery, you have to remove the back cover. Make sure your device is turned off. Hold the device securely with the front facing down. With your thumb or finger, lift up the bottom of the back cover. To install the USIM/SIM card Pull back the red rubber door near the SIM card slot to allow you to insert the USIM/SIM card.
  • Page 22 To install the battery Install the battery by inserting it with its exposed copper part aligned with the protruding copper conductor on the lower-right side of the battery compartment. Insert the bottom side of the battery first, then gently push the battery into place.

  • Page 23: Starting Up

    Getting Started 23 1.3 Starting Up After inserting your USIM/SIM card and battery, you can now power on and start using your device. Turn your device on and off To turn on the power Press and hold the POWER button for a few seconds. When you turn on your device for the first time, a Quick Start Wizard will guide you through the calibration process and the setup of regional settings, date and time, and password.

  • Page 24: Charge The Battery

    To automatically configure data connection settings When you see the notification message from the Connection Setup, tap Yes. Notes • If you do not see the notification message, tap display the message. • If your USIM/SIM card supports multiple network operator profiles, a message will appear with network profile choices.

  • Page 25: Switch Your Device To Sleep Mode

    To quickly change the screen orientation, you can also tap the Rotate Screen icon in HTC Home’s Launcher. See “HTC Home” later in this chapter for details. To smooth the edges of screen fonts for many programs, on the ClearType tab, select the Enable ClearType check box.

  • Page 26: The Today Screen

    You can touch or tap a section on the screen to open the associated program. Connection status Notification Open Start Menu HTC Home (See “HTC Home” in this chapter for details) Your upcoming appointments • To access the Today screen, tap Start > Today.

  • Page 27: The Start Menu

    1.5 The Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus. Switch to the Today screen.

  • Page 28: Quick Menu

    1.6 Quick Menu The Quick Menu, located at the top right corner of the Today screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customize how programs are closed.

  • Page 29: Htc Home

    Profile selector where you can quickly change the profile or ring tone of your device. HTC Home has four components: Home, Weather, Launcher and Sounds. At the bottom of HTC Home, there is a toolbar that allows you to switch between these components. HTC Home...
  • Page 30 Home Home displays the current day, date and local time. When you have new incoming messages and calls, it shows you the number of new e-mails, SMS/MMS messages, and missed calls. If you have set up the alarm, it also shows the Alarm icon.
  • Page 31 You can also browse through the list of cities to choose your city. Select the city on the list and tap Select. To view weather information After selecting your city, your device automatically connects to the Internet via GPRS/3G and downloads weather information of the current day and the next four days of the week.
  • Page 32 You can enable or disable the following options: • Download weather data automatically selected, weather information will automatically be downloaded from the AccuWeather Web site whenever you select the has not been updated within the last three hours. Weather data will also be downloaded every time an ActiveSync connection occurs (through over- the-air or USB connection).
  • Page 33 Touch a shortcut to remove it. Note To replace a shortcut, you need to delete it first and then add a shortcut to your favorite program or setting. Sound Sound provides a selection of profiles, each preconfigured with a different volume setting.

  • Page 34: Touchflo

    1.9 TouchFLO™ TouchFLO™ is a special feature that gives you a better touch panel experience on your device. With TouchFLO, you can simply use your finger to scroll and pan the screen. TouchFLO also features the Touch Cube where you can launch messaging programs, Internet Explorer®...
  • Page 35 To navigate the Touch Cube The Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen. Touch Cube screens There are three sides to the Touch Cube interface: •...
  • Page 36 When you have different phone numbers assigned to the same contact, an icon appears on the top left corner of the contact square to tell you which number is assigned to the particular square. Tap to call the number associated with the contact.
  • Page 37 • The second side of the interface provides quick shortcuts to your e-mail messages, text and MMS messages, the Internet, and other applications. Simply touch the icons on the screen to open the corresponding program. • On the third side of the interface, you can play back music and access the images and video files on your device.

  • Page 38: Finger Scrolling And Finger Panning

    Finger scrolling and finger panning With TouchFLO, you can use finger scrolling and finger panning when viewing content that cannot be fit entirely on the screen, such as Web pages, documents, and messages. Finger scrolling can also be used to scroll up and down lists such as the contacts list, file list, message list, calendar appointments list, and more.
  • Page 39 To use finger panning • To pan downward, touch and hold on the touch screen then drag your finger upward. • To pan upward, touch and hold on the touch screen then drag your finger downward. • To pan towards the right, touch and hold on the touch screen then drag your finger to the left.
  • Page 40 To go to the next or previous message While reading a message, slide your finger across the screen to go to the next or previous message. To go to the next message, slide your finger from right to left on the screen; To go to the previous message, slide your finger from left to right on the screen.

  • Page 41: Status Icons

    1.10 Status Icons The following are some of the status icons that you may see on the device. Icons that appear in this area Connection Setup There are more notifications. In the enlarged Title Bar, tap to view all New text messages; SMS notification of voice mail Receiving MMS message New MMS message received...
  • Page 42 Icons that appear in this area GPRS connecting GPRS in use EDGE connecting EDGE in use HSDPA connecting HSDPA in use. UMTS connecting UMTS in use Maximum signal strength No signal Phone is turned off No phone service. Searching for phone service Voice call in progress Call on hold Calls are forwarded...

  • Page 43: Programs

    1.11 Programs The following are programs that are preinstalled on your device. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Calendar Keep track of your appointments and create meeting requests.

  • Page 44: Getting Started

    44 Getting Started Icon Description Audio Booster Enhances your music experience by providing you with controls for adjusting equalizer, 3D sound, treble, and bass settings. Audio Manager Browse and play back music files. Bluetooth Explorer Search for other Bluetooth devices that have file sharing enabled and access their Bluetooth shared folder.
  • Page 45 Getting Started 45 Icon Description SAPSettings Enable Bluetooth Remote SIM access on your device. Search Search contacts, data, and other information on your device. SIM Manager Manage the contacts that are stored on your SIM card. You can also use this program to copy SIM contents to Contacts on your device.

  • Page 46: Settings

    1.12 Settings You can adjust the device settings to suit the way you work. To see all available settings, tap Start > Settings, then tap the Personal, System, and Connections tabs located at the bottom of the screen. Personal tab Icon Description Buttons Assign a program or function to a hardware button.

  • Page 47: System Tab

    Getting Started 47 System tab Icon Description About This is where you can see basic information such as the Windows Mobile® version and type of processor used on your device. You can also specify a name for your device. Backlight Set the backlight timeout and adjust brightness. Certificates See information about certificates that are installed on your device.
  • Page 48 48 Getting Started Icon Description Long Press End Key Lets you set the behavior when you press and hold the END key. Memory Check the device memory allocation status and memory card information. You can also stop currently running programs. Microphone AGC Adjust the volume of your voice automatically when you are recording.

  • Page 49: Connections Tab

    Getting Started 49 Connections tab Icon Description Beam Set your device to receive incoming Bluetooth beams. Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other Bluetooth devices. Comm Manager Manage your device’s connections (including GPRS/3G, Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/ vibration mode, enable or disable the Direct Push function, and more.
  • Page 50 50 Getting Started...

  • Page 51: Chapter 2 Entering And Searching Information

    Chapter 2 Entering and Searching Information 2.1 Entering Information 2.2 Using the 20-key QWERTY Hardware Keyboard 2.3 Using the Onscreen Keyboard 2.4 Using Touch Keyboard 2.5 Using Touch Keypad 2.6 Using Symbol Pad 2.7 Using Letter Recognizer 2.8 Using Block Recognizer 2.9 Using Transcriber 2.10 Searching Information...

  • Page 52: Entering Information

    52 Entering and Searching Information 2.1 Entering Information When you start a program or select a field that requires text or numbers, you can either use the 20-key QWERTY hardware keyboard or one of the onscreen input methods to enter information. 20-key QWERTY hardware keyboard To reveal the 20-key QWERTY keyboard, slide up the front panel of the device.
  • Page 53 To toggle between showing and hiding the Input Panel, simply tap the Input Panel icon. Icon Input method Onscreen Keyboard Touch Keyboard Touch Keypad Letter Recognizer or Block Recognizer Transcriber Note Some text input methods may not be available in certain language versions of the device.

  • Page 54: Using The 20-Key Qwerty Hardware Keyboard

    2.2 Using the 20-key QWERTY Hardware Keyboard You can enter text, numbers, and symbols by using the 20-key QWERTY keyboard. When you select a field that requires entering text or numbers, the phone automatically selects the appropriate input mode. To change the input method, press and hold method you want to use on the menu.

  • Page 55: Numeric Mode

    XT9 mode To form a word in XT9 mode, press the keys that contain the letters you want. As you enter letters, XT9 analyzes your keypresses and attempts to complete the word. XT9 also tries to predict your next word based on previous sentences you have type.

  • Page 56: Using The Onscreen Keyboard

    2.3 Using the Onscreen Keyboard The onscreen Keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen. To enter text using the onscreen Keyboard In a program, tap the Input Selector arrow, and tap Keyboard. Enter text by tapping keys on the onscreen Keyboard.

  • Page 57: Using Touch Keypad

    To use the Touch Keyboard Start a program that accepts user input, such as Word Mobile. Tap the Input Selector arrow, and tap Touch Keyboard. Enter text by tapping keys on the onscreen Keyboard. The way you enter characters using the Touch Keyboard is similar to using the 20-key keyboard;...

  • Page 58: Using Symbol Pad

    To use the Touch Keypad Start a program that accepts user input, such as Word Mobile. Tap the Input Selector arrow, and tap Touch Keypad. Enter text by tapping keys on the onscreen keypad. See “Multipress mode”, “XT9 mode”, and “Numeric mode” to learn how to enter characters.

  • Page 59: Using Letter Recognizer

    To change Symbol Pad settings Tap the Input Selector arrow, and tap Options. In the Input Method tab, select Touch Keyboard in Input method and tap Options. Select the Turn on one-touch symbol entry check box to select only one symbol at a time and immediately close the Symbol Pad after your selection.

  • Page 60: Using Block Recognizer

    2.8 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. Note Block Recognizer is available when text entry is possible. To use Block Recognizer From a program, tap the Input Selector arrow, and tap Block Recognizer.
  • Page 61 To enter punctuation and symbols Transcriber comes with an onscreen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this onscreen keyboard, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. Tips •...

  • Page 62: Searching Information

    2.10 Searching Information You can search for files and other items stored in My Documents folder or on an installed storage card of your device. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help.

  • Page 63: Chapter 3 Using Phone Features

    Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 Making a Video Call 3.5 Receiving a Video Call 3.6 Smart Dial 3.7 Additional Dialing Information 3.8 Setting Up Bluetooth SIM Access for Car Kit Phones...

  • Page 64: Using The Phone

    3.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. You can also dial directly from Contacts, and easily copy phonebook entries from your SIM card to Contacts on your device.

  • Page 65: Adjust The Device Volume

    Airplane Mode Another way to turn off the phone function is to switch your device to Airplane Mode. To enable or disable Airplane Mode When you enable Airplane Mode, it turns off all wireless radios on your device, which include the phone function and Bluetooth. When you disable Airplane Mode, it turns the phone function back on.

  • Page 66: Making A Call

    3.2 Making a Call With your device, you can make a call from Phone, Contacts, TouchFLO, Speed Dial, Call History, and SIM Manager. Make a call from Phone While on the Today screen, open the keyboard of the device. Start pressing the numeric keys on the keyboard to enter the phone number.

  • Page 67: Make A Call From Call History

    Make a call from TouchFLO To place a call to a favorite contact that you added to TouchFLO’s Touch Cube, follow these steps: Open the Touch Cube by sliding your finger upward, starting from the bottom of the touch screen where it shows a logo image. (See Chapter 1 for detailed instructions.) Slide your finger left or right to rotate the cube and navigate to the screen where it shows your favorite contacts.

  • Page 68: Make A Call From Sim Manager

    Before you can create a Speed Dial entry, the number must already exist in Contacts. To create a Speed Dial entry On the Phone screen, tap Menu > Speed Dial. Tap Menu > New. Tap a contact. Select the phone number that you want to add to be assigned with a speed dial key.

  • Page 69: Receiving A Call

    3.3 Receiving a Call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. To answer or reject an incoming call • To answer the call, tap Answer, or press TALK on the device. •...
  • Page 70 To add a new phone number to your Contacts list after a call If the number of the person who called is not in your Contacts list, you can choose to save the number after you hang up. To enable this feature, tap Start >...
  • Page 71 To set up a conference call Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress. Tap Menu > Conference. Note Not all service providers support conference calling. Contact your service provider for details.

  • Page 72: Making A Video Call

    3.4 Making a Video Call Your device allows you to make video calls when you are within a 3G network coverage area. You need to use a 3G enable SIM card to make video calls. To make a video call •...
  • Page 73 Swap Image options Both parties (My video small) Both parties (My video large) Both parties (equal) Other party only Status area. Displays your service provider name, the other party's information, and call timer. Image display area. Displays your image and the other party's image, depending on the selected Swap Image setting.

  • Page 74: Set Up Video Call Options

    Adjust the brightness To adjust the brightness of the image, press NAVIGATION right to make it brighter or press NAVIGATION left to make it less bright. When you press NAVIGATION left or right during a video call, a brightness bar appears at the bottom of the screen.
  • Page 75 General tab • Show still image. Select the image you want to display when you turn off the camera. • Preset (female). Displays a female picture in place of your image. • Preset (male). Displays a male picture in place of your image. •...

  • Page 76: Receiving A Video Call

    3.5 Receiving a Video Call To answer or reject an incoming video call • To answer the video call, tap Answer, or press TALK on your device. • To reject the video call, tap Ignore, or press END on your device. To end a video call Once an incoming or outgoing video call is in progress, press END on the device to hang up.

  • Page 77: Make A Call Or Send A Text Message Using Smart Dial

    If the matching list is long and you want to narrow down the search further, enter another letter. Using the same example above, if you continue to tap “3” which is associated with [d, e, f ], the matching list will be narrowed down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”, “Dixon, Allan”.

  • Page 78: Additional Dialing Information

    3.7 Additional Dialing Information Make an emergency call • Enter the international emergency number for your locale, and press the TALK button on your device. Additional emergency numbers may be included in your SIM card. Contact your service provider for details. Make an international call Press and hold number 0 key on the phone screen) until the + sign appears.
  • Page 79 On the BT Remote SIM Access screen, select the Remote SIM Access check box then tap Done. Connect the car kit phone to your device via Bluetooth. To learn how to connect, consult your car kit phone’s manual. If this is the first time you are pairing the car kit phone with your device, enter the car kit’s passcode on your device.
  • Page 80 80 Using Phone Features...

  • Page 81: Chapter 4 Setting Up Your Device

    Chapter 4 Setting Up Your Device 4.1 Basic Settings 4.2 Personalizing the Today Screen 4.3 Protecting Your Device...

  • Page 82: Basic Settings

    4.1 Basic Settings Time and date To set the time and date Tap Start > Settings > System tab > Clock & Alarms > Time tab. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the time on your PC.

  • Page 83: Ringer Settings

    To set the backlight to dim after a time delay Tap Start > Settings > System tab > Backlight. Tap the Battery power tab, or the External power tab. Select the Turn off backlight if device is not used for check box, and specify the time delay.

  • Page 84: Alarms And Notifications

    You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you downloaded from the Internet or copied from your PC as ring tones. For a complete list of supported audio file formats for ring tones, see "Specifications"...

  • Page 85: Phone Services

    Phone services Your device can directly link to the mobile phone network, and allow you to access and change the settings of various phone services for your device. Phone services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact your wireless service provider to find out about the availability of phone services for your device.
  • Page 86 To display owner information Having owner information displayed on the Today screen makes it easier for someone to return your device to you if it is lost. Tap Start > Settings > Personal tab > Owner Information. On the Identification tab, enter your personal information. Tips •...

  • Page 87: Protecting Your Device

    Do any of the following: • Under Display number of, select the type of tasks you want to appear on the Today screen. • In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks. For more information about creating tasks on your device, see Chapter 6.

  • Page 88: Encrypt Files On Your Storage Card

    To set a device password Tap Start > Settings > Personal tab > Lock. Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be idle before a password is required.

  • Page 89: Chapter 5 Synchronizing Information With Your Computer

    Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.6 Synchronizing Music and Video...

  • Page 90: About Synchronization

    5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device. The following types of information can be synchronized between your computer and your device: • Microsoft Outlook® information, which include Outlook e-mail, contacts, calendar, tasks, and notes •...

  • Page 91: Setting Up Windows Mobile® Device Center On Windows Vista

    5.2 Setting Up Windows Mobile® Device Center on Windows Vista® Microsoft Windows Mobile® Device Center is the replacement for Microsoft® ActiveSync® on Windows Vista®. Note Some versions of Windows Vista come with Windows Mobile Device Center already installed. If Windows Mobile Device Center is not available on your Windows Vista, you can install it from the Getting Started Disc that came with your device.

  • Page 92: Use Windows Mobile Device Center

    Select the items you want to synchronize, then click Next. Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes your device automatically. Notice that Outlook e-mails and other information will appear on your device after synchronization. Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start >...

  • Page 93: Setting Up Activesync® On Windows Xp

    5.3 Setting Up ActiveSync® on Windows XP® The Getting Started Disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, please go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx.

  • Page 94: Synchronizing With Your Computer

    5.4 Synchronizing With Your Computer Connect and synchronize your device with your PC using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or PC. From your device • Tap Start > Programs > ActiveSync., then tap Sync. To end synchronization before it completes, tap Stop.

  • Page 95: Troubleshoot Sync Connection Problem

    To change synchronization settings for an information type, for instance, E-mail, select it and tap Settings. You can then set the download size limit, specify the time period of information to download, and more. Notes • Some information types such as Favorites, Files and Media cannot be selected in ActiveSync Options on your device.

  • Page 96: Synchronizing Music And Video

    Make sure that Bluetooth on both your device and the computer are turned on and set to visible mode. For more information, see “Bluetooth” in Chapter 10. Tap Menu > Connect via Bluetooth. Make sure the Bluetooth function of both your device and the computer are turned on and set to visible mode.

  • Page 97: Other Information

    Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts 6.2 SIM Manager 6.3 Calendar 6.4 Tasks 6.5 Notes 6.6 Voice Recorder...

  • Page 98: Contacts

    6.1 Contacts Contacts is your address book and information storage for the people and businesses you communicate with. You can create the following types of contacts on your device: • Outlook contacts. Contacts that are stored on your device, which can be created on your device or synchronized with your PC or the Exchange Server.
  • Page 99 To add a photo of the contact, tap Select a picture, then select the picture file or tap Camera to take a photo of the contact. This photo appears on the Phone screen when you receive a call from the contact.
  • Page 100 Touch the name of a contact to open his or her contact card. On the contact card, you will see the last outgoing or incoming call as well as detailed information such as phone numbers of the contact, e-mail address, and more. To group similar contacts You can group similar contacts for easier management by assigning them to categories.

  • Page 101: Share Contact Information

    • Begin entering a contact name in the provided text box until the contact you want is displayed. • Filter the list by categories. In the contact list, tap Menu > Filter, then tap a category you’ve assigned to a contact. To show all contacts again, select All Contacts.

  • Page 102: Sim Manager

    6.2 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card Tap Start >...
  • Page 103 Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. After modifying, tap OK. Tap Menu >...

  • Page 104: Calendar

    6.3 Calendar Use Calendar to create appointments, including meetings and other events. You can also synchronize Calendar appointments between your device and PC. Create appointments To schedule an appointment Tap Start > Calendar. Tap Menu > New Appointment. Enter a name for the appointment. Do one of the following: •...

  • Page 105: View Appointments

    Set the time when you want the reminder to alert you. Tap OK to return to the calendar. View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments.

  • Page 106: Send Appointments

    Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. Tap Start > Calendar. Schedule a new appointment, or open an existing one and tap Menu > Edit. Tap Attendees, then tap Add Required Attendee or Add Optional Attendee and add the contacts whom you want to invite.

  • Page 107: Tasks

    6.4 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task Tap Start >...
  • Page 108 To set the default reminder for all new tasks Tap Start > Programs > Tasks. Tap Menu > Options. Select the Set reminders for new items check box. Tap OK to return to the task list. Note The new tasks must have due dates set in order for the reminder to take effect.

  • Page 109: Notes

    6.5 Notes Using Notes, you can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and more. To create a note Tap Start > Programs > Notes. In the note list, tap New. Tap the Input Selector arrow next to the Input Method icon on the menu bar, tap the input method you want, and enter your text.
  • Page 110 To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. Tap Start > Programs > Notes. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar.

  • Page 111: Voice Recorder

    6.6 Voice Recorder Voice Recorder lets you record your voice and then quickly send it in an MMS or e-mail, beam it, or set the recorded voice as your ring tone. Note Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate Narrowband) format only.
  • Page 112 To beam the voice recording Select the voice recording(s) you want to beam then tap Menu > Beam File. To select multiple files, tap and drag over the desired files or tap Menu > Select All. Tap the device you want to send the voice recording(s) to. On the other device, accept the file transfer to receive the file.

  • Page 113: Chapter 7 Exchanging Messages

    Chapter 7 Exchanging Messages 7.1 Messaging 7.2 Text Messages 7.3 MMS 7.4 Types of E-mail Accounts 7.5 E-mail Setup Wizard 7.6 Using E-mail...

  • Page 114: Messaging

    7.1 Messaging Messaging is where your text messages (SMS), multimedia messages (MMS), and e-mails are located. When you receive new messages, you can open them from the Today screen. Simply tap the type of message that you want to open. New e-mail messages To select a messaging account Do one of the following:...

  • Page 115: Text Messages

    To automatically add a signature in outgoing messages You can automatically add your name and other information as your signature in outgoing SMS, MMS and e-mail messages by following these steps: You need to specify your signature for each type of messaging account. Tap Start >...

  • Page 116: Copy Text Messages From And To The Sim Card

    A new text message is then created. To add more recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To if you want to add mobile phone numbers from Contacts Enter your message.

  • Page 117: Change Mms Settings

    7.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, or audio clips in a multimedia message. Notes • Please note that multimedia messaging is a charged service and has to be provisioned on your mobile account.

  • Page 118: Create And Send Mms Messages

    • Port number. HTTP port number used for connecting to the MMS server and for file transfer. • Server address. URL address of the server where MMS messages are stored. • Connect via. Select the connection that your device uses for MMS messages.
  • Page 119 Tap the Insert icon ( When selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing. • to take a photo and insert it into the MMS message. •...

  • Page 120: View And Reply To Mms Messages

    To add an audio clip to an MMS message You can add one audio clip per slide in your MMS message. Tap Insert audio. By default, My Documents will be shown. Tap My Music or another folder that contains audio files. When navigating folders, tap the Down arrow ( ) to return to the upper folder.

  • Page 121: Types Of E-Mail Accounts

    To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. When you receive a new MMS message, open and view the message. To avoid receiving MMS messages from this sender next time, tap Menu >...

  • Page 122: E-Mail Setup Wizard

    7.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup Wizard lets you easily set up your personal and work e-mail accounts. You can add an e-mail account from an Internet Service Provider (ISP) or other e-mail provider as well as web-based accounts such as Gmail®, Yahoo!®...
  • Page 123 Note If Auto Setup is unsuccessful, select Internet e-mail from the Your e-mail provider list on the next screen. You will also be asked to enter e-mail server settings during the setup process. See “To specify e-mail server settings” for details. Enter your name.
  • Page 124 To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap Review all download settings to choose download options, message format, and other settings. Options Automatic Send/Receive Download messages Send/receive when I click Send Use automatic send/...

  • Page 125: Using E-Mail

    7.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create and send messages To compose and send a message Tap Start > Contacts. Slide your finger upward on the touch screen to scroll down the contact list.

  • Page 126: Filter The Inbox Message List

    To automatically add a signature in outgoing messages You can automatically add your name and other information as your signature in outgoing SMS, MMS and e-mail messages by following these steps: You need to specify your signature for each type of messaging accounts. Tap Start >...

  • Page 127: View And Reply To Messages

    View and reply to messages To read an incoming message By default, only the first few kilobytes of a message are shown when you open an incoming message. To read the whole message: • Finger-scroll to the end of the message and tap Get the rest of this message.
  • Page 128 • If your company is running Microsoft Exchange Server 2007, the attachment downloads immediately, without waiting until the next time you synchronize. For more information about working with company e-mails, see Chapter 8. To reply to or forward a message Open the message and tap Menu >...

  • Page 129: Download Messages

    Download messages The manner in which you download messages depends on the type of e-mail account you have. To send and receive e-mail for an Outlook account Connect your device to your PC using the USB cable or Bluetooth. Otherwise, connect wirelessly if you are synchronizing Outlook e-mail with the Exchange Server.
  • Page 130 To change the download size and format for POP3/IMAP4 e-mail Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. Tap your e-mail account. Keep tapping Next until you see Message format and Message download limit on the screen.

  • Page 131: Chapter 8 Working With Company E-Mails And Meeting Appointments

    Chapter 8 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing Your Device with the Exchange Server 8.2 Working With Company E-mails 8.3 Managing Meeting Requests 8.4 Finding Contacts in the Company Directory...

  • Page 132: Synchronizing Your Device With The Exchange Server

    8.1 Synchronizing Your Device with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet wirelessly and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.

  • Page 133: Start Synchronization

    Note If you synchronized e-mails with your PC before, open ActiveSync on your device and tap Menu > Add Server Source to set up an Exchange Server connection. When you're prompted to select information types for synchronization, you need to clear the E-mail check box under the Windows PC item first before you can select E-mail under Exchange Server.

  • Page 134: Scheduled Synchronization

    also immediately updated onto your device when these items have been changed or new entries have been added on the Exchange Server. To make Direct Push work, you need to have a GPRS connection on your device. You need to perform a full synchronization between your device and the Exchange Server first before Direct Push can be enabled.

  • Page 135: Instant Download Through Fetch Mail

    Instant download through Fetch Mail The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save data cost. Requirement Fetch Mail works for your device only if your company is using Microsoft Exchange Server 2007 or higher.

  • Page 136: Flag Your Messages

    From the Look in list, choose whether to search from your inbox or outbox only or to search all folders. Tap Search. Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in the e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device.

  • Page 137: Out-Of-Office Auto-Reply

    Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply message when you’re not available. Requirement Out-of-office auto-reply works for your device only if your company is using Microsoft Exchange Server 2007 or higher.
  • Page 138 Tap Accept to reply and accept the meeting request, or tap Menu > Decline if you cannot attend the meeting. Tips • Before responding, you can check your availability during the time of the requested meeting by tapping View your calendar. •...

  • Page 139: Finding Contacts In The Company Directory

    8.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send e-mail messages and meeting requests to anyone in your company. Requirement Access to the Company Directory is available only if your organization is running Microsoft Exchange Server 2003 SP2 or...
  • Page 140 Notes • You can save a contact from the Company Directory to your device by selecting the contact then tapping Menu > Save to Contacts. • You can search on the following information as long as that information is included in the Company Directory: First name, Last name, E-mail name, Display name, E-mail address, or Office location.

  • Page 141: Chapter 9 Working With Documents And Files

    Chapter 9 Working With Documents and Files 9.1 Microsoft® Office Mobile 9.2 Adobe® Reader® LE 9.3 Copying and Managing Files 9.4 ZIP 9.5 Backing Up Data...

  • Page 142: Microsoft® Office Mobile

    9.1 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Word Mobile lets you create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files. • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device.

  • Page 143: Adobe® Reader® Le

    9.2 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE •...

  • Page 144: Copying And Managing Files

    9.3 Copying and Managing Files You can copy files between your device and PC, or copy files to a storage card that is inserted on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync Connect your device to the PC.

  • Page 145: Zip

    To copy files to a storage card Make sure the storage card is properly inserted into your device. Tap Start > Programs > File Explorer and navigate to the appropriate folder. Tap and hold the file you want to copy, and tap Copy. Tap the Down arrow ( Tap Menu >...

  • Page 146: Backing Up Data

    Tap Menu > Action > Extract. Choose a folder in which files will be extracted to, then tap Extract. To create a zip archive Tap File > New Archive. On the Save As screen, enter a zip file name and choose a folder in which to save the zip file.
  • Page 147 To open Sprite Backup • On your device, tap Start > Programs > Sprite Backup. Sprite Backup can operate in two different modes: Basic mode and Advanced mode. Basic mode To back up data in Basic mode Basic mode is the default mode, and allows you to easily back up your entire device with the tap of a button.
  • Page 148 To back up data in Advanced mode Advanced mode is designed for users with more advanced backup requirements. Tap Options > Switch to Advanced Mode. In the Backup tab, you will see a tree view of the data and files on your device.

  • Page 149: Chapter 10 Getting Connected

    Chapter 10 Getting Connected 10.1 Comm Manager 10.2 Connection Setup 10.3 Ways of Connecting to the Internet 10.4 GPRS/3G 10.5 Dial-up 10.6 Starting a Data Connection 10.7 Internet Explorer® Mobile 10.8 Windows Live™ 10.9 Using Your Device as a Modem (Internet Sharing) 10.10 Bluetooth...

  • Page 150: Comm Manager

    10.1 Comm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager Tap Start > Programs > Comm Manager. Tap to switch Airplane mode on or off. Turning on Airplane mode turns off the phone and Bluetooth functions.

  • Page 151: Connection Setup

    10.2 Connection Setup Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network operator, then Connection Setup does all the configuration for you.

  • Page 152: Ways Of Connecting To The Internet

    Note If you choose a Country and/or Operator that is different from the installed SIM card network operator, you may not be able to access network services. Tap OK. The next message that appears prompts you to confirm whether you want to configure the data connection settings based on the selected network.
  • Page 153 To add a new GPRS/3G connection In times when you need to add another GPRS/3G connection on your device, obtain the Access point name from your wireless service provider. Also, check if a user name and password are required. Tap Start > Settings > Connections tab > Connections. Under My ISP, tap Add a new modem connection.

  • Page 154: Dial-Up

    10.5 Dial-up To set up a dial-up connection to your Internet Service Provider (ISP) on your device, you need the same settings that you normally use when you dial up from your computer. This includes the ISP server phone number, your user name and password.

  • Page 155: Internet Explorer® Mobile

    10.7 Internet Explorer® Mobile Internet Explorer® Mobile is a full-featured Internet browser, optimized for use on your device. To open Internet Explorer® Mobile Tap Start > Internet Explorer. To go to a Web site Enter the Web site address in the Address Bar, then tap To view a Web page using finger scrolling and panning •...
  • Page 156 Tap Menu > Add to Favorites to save the current Web page in your Favorites folder. Tap Menu > Tools and choose to send the current Web page link, view the page’s properties, or set preferences. Tap Menu > View to select the text size and type of view.

  • Page 157: Windows Live

    For more information about using Internet Explorer® Mobile, please go to: http://www.microsoft.com/windowsmobile/help/pocketpc/browseinternet. mspx 10.8 Windows Live™ Windows Live™ gives you full Internet experience on your device. It helps you to find information, pursue your interests, and get in touch with friends and family on the Internet easier.

  • Page 158: The Windows Live™ Interface

    Choose what information you want to sync online with your device. If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live contacts will be added to the contact list and to Live Messenger on your device. If you select Sync e-mail, your Windows Live Mail or Hotmail inbox messages will be downloaded to...

  • Page 159: Launch The Messenger And Sign In

    If you chose to display the search bar and Windows Live™ applications on the Today screen when you were setting up Windows Live, you’ll also see them on the Today screen. To show or hide them from the Today screen, open Windows Live and tap Menu >...

  • Page 160: Add Windows Live Contacts

    To sign in and out Tap Sign in on the messenger screen. If this is your first time to sign in, a message appears to inform you that your messenger contacts will be added to the contact list on your device.

  • Page 161: Using Your Device As A Modem (Internet Sharing)

    In the IM box, enter the e-mail address of the contact, which can be a Windows Live ID or any other e-mail address. You can fill in other information about the contact, if desired. This is not absolutely necessary if you will communicate with the contact only through Windows Live Messenger or Live Mail.
  • Page 162 To set up your device as a USB modem On your device, tap Start > Programs > Internet Sharing. In the PC Connection list, select USB. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet. Plug in the USB cable between your device and the computer.

  • Page 163: Bluetooth

    c. In the Bluetooth Personal Area Network Devices dialog box, select your phone, then click Connect. For Windows XP: a. Tap Start > Control Panel > Network Connections. b. Under Personal Area Network, click the Bluetooth Network Connection icon. c. Under Network Tasks, click View Bluetooth network devices. d.

  • Page 164: Bluetooth Partnerships

    • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device. Note By default, Bluetooth is turned off. If you turn it on, then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on.

  • Page 165: Connect A Bluetooth Hands-Free Or Stereo Headset

    Note Creating a Bluetooth partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a passcode again. To accept a Bluetooth partnership Ensure that Bluetooth is turned on and in visible mode. Tap Yes when prompted to establish a partnership with the other device.

  • Page 166: Beam Information Using Bluetooth

    Tap the name of the Bluetooth headset, then tap Next. Enter the passcode of the Bluetooth headset, then tap Next. Make sure the Hands Free check box is selected. If you have a Bluetooth stereo headset, also make sure Wireless Stereo is selected.
  • Page 167 If your computer has Windows Vista or Windows XP SP2 and your computer’s Bluetooth adapter is supported by your Windows version, do the following steps: a. On your computer, open Bluetooth Devices from the Control Panel then click the Options tab. b.

  • Page 168: Bluetooth Explorer And Bluetooth File Sharing

    • For your device to receive Bluetooth beams, tap Start > Settings > Connections tab > Beam and make sure the Receive all incoming beams check box is selected. Bluetooth Explorer and Bluetooth file sharing Bluetooth Explorer searches for other Bluetooth devices that have file sharing enabled and lets you access their Bluetooth shared folder.

  • Page 169: Print Files Via Bluetooth

    If there are files contained in the Bluetooth shared folder on the other device, you will be able to see them on the Bluetooth Explorer screen. Select one or more files, then tap Menu > Edit and choose to cut or copy the files.

  • Page 170: Via Bluetooth

    To print a message Tap Start > Messaging and then select the messaging account where the message you want to print is located. Select the message you want to print. Follow steps 2 to 5 in the “To print contact information” procedure. To print a JPEG file Do one of the following: •...

  • Page 171: Chapter 11 Experiencing Multimedia

    Chapter 11 Experiencing Multimedia 11.1 Camera 11.2 Camera Album 11.3 Pictures & Videos 11.4 Windows Media® Player Mobile 11.5 Streaming Media 11.6 Flash Lite Player 11.7 Audio Manager 11.8 Audio Booster...

  • Page 172: Camera

    11.1 Camera Taking photos and recording video clips along with audio are easy with your device’s built-in camera. To open the Camera screen Do one of the following: • Press the CAMERA button on your device. • Tap Start > Programs > Camera. The screen orientation automatically switches to landscape mode when you open Camera.
  • Page 173 The available capture modes of the camera are as follows: Icon Capture Mode Photo: Captures standard still images. Video: Captures video clips, with or without accompanying audio. MMS Video: Captures video clips suitable for sending with MMS messages. Contacts Picture: Captures a still image and gives you the option to immediately assign it as a Photo ID for a contact.

  • Page 174: Onscreen Controls And Indicators

    Camera controls • Press CAMERA or ENTER to take a photo or contacts picture. • Press CAMERA or ENTER to start recording video; press it again to stop recording. • Press CAMERA or ENTER each time when taking photos for a picture theme or panorama.
  • Page 175 Remaining information indicator. In Photo, Contacts Picture, Picture Theme, Sports, and Burst modes, this shows the remaining, available shots of pictures based on current settings. In Video and MMS Video modes, this shows the remaining duration that can be recorded. While recording video, this shows the recorded duration.
  • Page 176 Zooming Before capturing a still image or a video clip, you can zoom in to make the object in focus move closer or zoom out to make the object move farther away. Note The zoom control only appears onscreen when zooming is supported by the Resolution you have selected.

  • Page 177: Quick Settings Panel

    Capture mode Capture size setting Large (640 x 480) Panorama Medium (320 x 240) Large (640 x 480) Sports Medium (320 x 240) Large (640 x 480) Burst Medium (320 x 240) For capture size settings and zoom ranges when using the 2nd camera, please refer to the online help.

  • Page 178: The Review Screen

    Camera. The camera icon ( camera being used. Tap to cycle through the different cameras. Self-timer. Tap to set the Self-timer to 2 seconds, 10 seconds, or Off when in the Photo or Contacts Picture mode. When you press the CAMERA or ENTER button to capture a still image, it starts to count down, and then captures a still image after the assigned time.

  • Page 179: Camera Settings

    Icon Assign to Contacts Browse You can set the Review screen duration by tapping screen and then tapping Advanced tab Camera settings Tap the Menu icon ( Settings screen allows you to configure capture and camera settings. The Camera settings consist of two tabs: Capture Settings and Advanced. Use the Capture Settings tab to adjust options for your selected capture mode.
  • Page 180 • Time Stamp (Photo, Sports and Burst modes). Choose whether or not to include the shooting date and time on captured photos. • Template (Picture Theme mode). Select a template. • Capture Speed (Burst and Sports modes). This determines the interval between shots.
  • Page 181 • Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the ENTER or CAMERA button. • Grid (Photo mode only). Choose whether or not to show a grid on the Camera screen. Showing a grid helps you frame and center your subject more easily and accurately.
  • Page 182 Note If you set the Camera to save captured photos to a storage card, the prefix cannot be selected. Captured photos will be named using the convention IMAGnnnn.jpg (where 'nnnn' is the counter) which is the DCIM (Digital Camera Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on the storage card.

  • Page 183: Camera Album

    11.2 Camera Album View your images and videos that you captured using the Camera program in Camera Album. Camera Album offers a host of features that let you rotate images, view your images as a slide show, use images as contact pictures, and more.
  • Page 184 To view an image On the main Camera Album screen, touch the thumbnail of the image you want to view. While viewing the image, you can zoom in or rotate the image. To learn how to zoom and rotate the image, see the succeeding procedures.
  • Page 185 To rotate the image View the image you want to rotate. With your finger, make a half-circle motion on the screen. Slide your finger clockwise to rotate the image 90 degrees clockwise. To zoom in or out of an image While viewing an image, make a full circle motion on the screen with your finger.
  • Page 186 To view the images as a slide show On the Camera Album screen, touch Slide Show. While viewing the slide show, touch the screen to show playback controls. Touch to open the slide show options where you can set the transition effect to use, time per slide, and orientation of the images.

  • Page 187: Pictures & Videos

    11.3 Pictures & Videos Pictures & Videos allows you to manage the following types of media files on your device: File Type Image GIF animation Video Audio To open Pictures & Videos Tap Start > Programs > Pictures & Videos. To copy media files to your device •...

  • Page 188: Pictures & Videos Menu

    To play GIF animation files Select a GIF animation file (marked with a The GIF Animation program then opens and plays the animation. To play videos By default, the contents of the My Pictures folder will be shown. To find the video clips that you captured, tap the down arrow ( next to the My Pictures folder and tap My Documents >...

  • Page 189: Windows Media® Player Mobile

    • To crop a picture, tap Menu > Crop. Next, tap and drag to select the area to crop. Tap inside the box to crop, or tap outside the box to cancel cropping. • To adjust the brightness and contrast levels of a picture, tap Menu >...

  • Page 190: About The Controls

    About the controls The following are available controls on the Windows Media® Player Mobile. Tap and drag to jump to any part of the video or audio Full screen Visit WindowsMedia.com Skip to the beginning of the current file or to the previous file Mute/Unmute Increase Volume...

  • Page 191: Synchronize Video And Audio Files

    Synchronize video and audio files Use the latest version of Windows Media® Player on your PC to synchronize digital media files from your PC to your device. This ensures that protected files and album art (for skins) are copied to your device correctly. To synchronize content to your device automatically On your PC, start Windows Media®...

  • Page 192: Play Media

    Playlists and Library List Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your PC to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device.

  • Page 193: Troubleshooting

    To play video and audio files on your device Select a category (for example, My Music or My Playlists). Tap and hold the item that you want to play (such as a song, album, or artist name), then tap Play. Tips •...

  • Page 194: Streaming Media

    11.5 Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the Web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. Jog Bar Full screen Stop Play/Pause...
  • Page 195 To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet.

  • Page 196: Flash Lite Player

    11.6 Flash Lite Player Flash Lite Player lets you play back Flash Lite™ animation files, games, and other types of Flash Lite files on your device. Note Flash Lite Player only supports playback of Flash Lite (not Flash) files. To open a Flash Lite File Tap Start >...

  • Page 197: Audio Manager

    11.7 Audio Manager Audio Manager is a music browser and player in one. It gives you access to all the music files on your device, and allows you to easily browse for the music that you want to play by organizing music into categories such as title, artist, album, etc.

  • Page 198: Music Player

    When you tap a category on the Library’s Main screen, you will see more submenus which may have deeper levels of menus. For example, when you tap Artists, another level of submenus will be listed showing artist names. When you tap an artist name, more submenus showing album names will be displayed.
  • Page 199 Notes • Audio Manager will search for playlists in the following locations: Device: \Playlists \Application Data\HTC\AudioManager\playlists Memory card: \Storage Card\Playlists • If a Windows Media® Player playlist contains a combination of music, video and image files, Audio Manager accesses the music files only and filters out the other media types.

  • Page 200: Set Music As Ring Tone

    To play back a playlist On the Playlists screen, tap to select a playlist. Tap the first song in the selected playlist. Music Player automatically opens and starts playing the first song. After each song, the next one in the playlist will be played. Note The content of playlists is not automatically updated when music files have been deleted from the device memory or memory card.

  • Page 201: Audio Booster

    11.8 Audio Booster Audio Booster enhances your music experience by providing you with controls for adjusting sound settings while you are listening to music. It adds 3D sound, treble and bass effects, and provides controls for adjusting them. It even has an equalizer with presets as well as a control panel for fine tuning sound.
  • Page 202 This control Does this Bass Adds a bass effect to increase the low tones in sound. Drag the slider to increase or decrease the effect. To disable the bass effect, adjust the setting to 0%. Done Tap to apply the modified settings. •...
  • Page 203 To create a custom equalizer preset Select the Equalizer check box to enable the equalizer. Adjust the frequency bands to your desired values by dragging the equalizer controls. The selected values are indicated on top of the sliders. Save your equalizer settings as a preset by tapping Menu >...
  • Page 204 204 Experiencing Multimedia...

  • Page 205: Chapter 12 Managing Your Device

    Chapter 12 Managing Your Device 12.1 Adding and Removing Programs 12.2 Using Task Manager 12.3 Resetting Your Device 12.4 Managing Memory 12.5 Windows Update 12.6 Battery Saving Tips...

  • Page 206: Adding And Removing Programs

    12.1 Adding and Removing Programs Before you purchase additional programs for your device, make sure that they are compatible with your device. To add programs Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors.
  • Page 207 To switch back to a running program Do one of the following: • Tap the program name in the Quick Menu. • On the Task Manager screen, tap and hold the program name in the Running tab, then tap Activate. To configure the Exit ( You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but...

  • Page 208: Resetting Your Device

    To add a running program to the exclusive list If you add a running program to the Exclusive Programs List, it will not be closed when you tap Stop Selected or Stop All and will not be listed in the Quick Menu on the Today Screen.

  • Page 209: Hard Reset

    Hard reset You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings -- the way it was when you first purchased it and turned it on.

  • Page 210: Clear Storage

    Clear Storage Another way of clearing the device storage and reset all settings back to factory default settings is to use the Clear Storage feature. You will lose all your data and files on the device storage when you use Clear Storage, so make sure to do a backup first.

  • Page 211: Windows Update

    12.5 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if they are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft Web site.

  • Page 212: Battery Saving Tips

    12.6 Battery Saving Tips How long your battery power lasts depends on battery type and how you use your device. Try the following to help preserve battery life: • When the device is not in use, press POWER to switch off the display. •...

  • Page 213: Chapter 13 Using Other Applications

    Chapter 13 Using Other Applications 13.1 Voice Commander 13.2 JBlend 13.3 Spb GPRS Monitor...

  • Page 214: Voice Commander

    13.1 Voice Commander Voice Commander enables you to use vocal commands to operate various device features. This program provides the following voice recognition functions: • Call contacts • Look up contacts • Numeric dialing You can record voice tags so that you can dial a phone number or launch programs simply by speaking a command.

  • Page 215: Create A Voice Tag For A Contact

    Create a voice tag for a Contact You can create customized voice tags for your contacts for improved accuracy and convenience. For example, you could create a voice tag that uses the word “boss” to dial your employer’s phone number. Note Refer to Voice Commander Help on your device for details on creating customized voice tags.

  • Page 216: Create A Voice Tag For A Program

    Create a voice tag for a program You can create customized voice tags to open applications with commands not included in the default command list. For example, you could use the word “audio” to open the Audio Manager. Note Refer to Voice Commander Help on your device for details on creating customized voice tags.

  • Page 217: Jblend

    13.2 JBlend JBlend is a Java application that lets you download, manage, and install MIDlets, Java applications such as games and tools that can run on mobile devices. Your device supports Java 2 Micro Edition, J2ME. To open JBlend Java Tap Start >...

  • Page 218: Manage Midlets

    To run a MIDlet Do one of the following: • After installation of the MIDlet is complete, tap Yes. • On the JBlend screen, double-tap the MIDlet. To stop running a MIDlet Tap Exit or Quit on the MIDlet screen or menu. Manage MIDlets You can delete installed MIDlets as well as set program permissions for MIDlet applications.

  • Page 219: The Gprs Monitor Icon And Pop-Up Window

    The Today Plug-in After you have installed GPRS Monitor on your device, you will find its program icon in Start > Programs. In addition, GPRS Monitor is also added to the Today screen as a plug-in which shows connection statistics, a brightness panel, battery panel, and shortcut icons.

  • Page 220: Set Up Monitoring And Notification

    Icon Bar 1: Speed (Full bar corresponds to 19KB/sec.) Set up monitoring and notification To select the connection to be monitored On the GPRS Monitor screen, tap Tools > Options > Connection tab. Select the Enable connection monitoring check box. In the Connection list, select the connection you want to monitor.

  • Page 221: View Charts And Reports

    To set up traffic limit notifications You can set up traffic limit notifications if you want to be notified when a traffic limit is reached. On the GPRS Monitor screen, tap Tools > Options. Enable the notifications on the Day Warn and Month Warn tabs. You can specify up to three daily and three monthly limits.
  • Page 222 222 Using Other Applications...

  • Page 223: Appendix

    Appendix A.1 Specifications A.2 Regulatory Notices...

  • Page 224: Specifications

    A.1 Specifications System Information Processor Memory Operating System Power Battery Charging Time Battery Life (estimates) AC Adapter Display LCD Type Resolution Orientation Qualcomm® 7200 400 MHz - ROM : 256 MB - RAM : 128 MB DDR (Figures are the total ROM and RAM memory available for use and storage.
  • Page 225 Video: 176 x 144 (QCIF), 128 x 96 Digital Zoom Up to 8X Connections I/O Port HTC ExtUSB Wireless Bluetooth 2.0 Connections Car Antenna External connector for GSM/EDGE Connector : 11-pin mini-USB and audio jack in one Hi-speed USB 2.0 HTC H2Wire support...
  • Page 226 40 polyphonic and Standard MIDI format 0 and 1 (SMF) / SP MIDI Playback Formats Audio Manager supported formats: MP3, WMA, AAC, AAC+ Controls and Lights Device Control • HTC TouchFLO™ • 5-Way NAVIGATION CONTROL / ENTER button • Two phone functions : TALK and END • Volume Buttons •...

  • Page 227: Regulatory Notices

    To ensure continued reliable and safe operation of your device, use only the accessories listed below with your NIKI100. The Battery Pack has been assigned a model number of NIKI160. Note This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.

  • Page 228: Safety Precautions For Rf Exposure

    • ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems. • ETSI EN 301 489-24 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services;...

  • Page 229: Sar Information

    Exposure to Radio Frequency (RF) Signals Your device contains a radio transmitter and receiver. The radiated output power is far below the international radio frequency exposure limits. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.

  • Page 230: Other Medical Devices

    Telecommunications & Internet Association (TIA) safety information Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

  • Page 231: Rohs Compliance

    The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste.
  • Page 232 232 Appendix...

  • Page 233: Index

    Index...
  • Page 234 Symbols 3D sound 201 3G 152 A2DP 165 ActiveSync - overview 43 - set up 93 - synchronize 94, 133 Add and remove programs 206 Adobe Reader LE 43, 143 Alarm 84 Answer/end a call 69 Appointment search 62 Attachment - add to e-mail 125 - download 127 Audio Booster 44, 201...
  • Page 235 GPRS/3G 152 GPRS Monitor 44, 218 Hard reset 209 Help 43 Help search 62 Home 30 HSDPA 49 HTC Home 29 IMAP4 122 Input methods - Block Recognizer 60 - Keyboard 56 - Letter Recognizer 59 - Symbol Pad 58...
  • Page 236 JBlend 217 - install MIDlets/MIDlet suites from device 217 - install MIDlets/MIDlet suites from Internet 217 - manage MIDlets/MIDlet suites 218 - overview 44 Keyboard - on-screen 56 Landscape 25 Launcher 32, 37 Letter Recognizer 59 Library screen (Windows Media Player Mobile) 190 Live Messenger 159 Mail search 62...
  • Page 237 - Audio Manager 197 - Touch Cube (TouchFLO) 37 - Windows Media Player Mobile 192 Play videos 188 Plug-in - GPRS Monitor 219 - HTC Home 29 POP3 122 Portrait 25 PowerPoint Mobile 43, 142 Programs 43 - Audio Booster 44, 201...
  • Page 238 - Comm Manager 49, 150 - Connections 49, 152, 154 - Connection Setup 49 - CSD Line Type 49 - GPRS Setting 49 - HSDPA 49 - Network Cards 49 - Network Wizard 151 - SMS Service 49 - USB to PC 49, 95 Settings (Personal tab) - Buttons 46 - Input 46...
  • Page 239 Tasks 45, 107 Tasks search 62 Task Manager 206 Text messages - copy from and to SIM card 116 - send 115 Text size (screen) 83 Today screen 26, 85 TouchFLO 34, 48, 67 Touch Cube (TouchFLO) 34 Touch Keyboard 56 Touch Keypad 57 Transcriber 60 Treble effects 201...
  • Page 240 240 Index...

This manual is also suitable for:

Niki100

Table of Contents