Advertisement
How to operate the menus
Main menu operation
HOME
BRILL
Open the home screen.
Open the home screen.
Select the [Menu] icon
Select the [Menu] icon
with the cursor.
with the cursor.
RotoKey
menu operation
TM
ENT
Open the RotoKey
Open the RotoKey
menu.
menu.
TM
TM
Pop-up menu operation
Push the joystick.
Push the joystick.
The pop-up menu appears.
The pop-up menu appears.
Display selection
HOME
BRILL
Open the home screen.
Open the home screen.
Basic operation
Zoom in and out
The +, - keys zoom in or out the chart scale (Plotter/Weather display) and select
The +, - keys zoom in or out the chart scale (Plotter/Weather display) and select
the range (Radar/Fish finder display).
the range (Radar/Fish finder display).
Zoom in
Zoom in
How to put a point, How to go to a point
How to put a point
Push the joystick.
Push the joystick.
Select the position to set
The pop-up menu appears.
The pop-up menu appears.
as a point.
How to go to a point
Push the joystick.
Push the joystick.
Select the point or position
The pop-up menu appears.
The pop-up menu appears.
to set as a point to go.
Do you want to navigate using the NAVpilot?
ENT
Yes
Select [Yes] or [No] in
Select [Yes] or [No] in
Activate [Go To].
the dialog box*.
the dialog box*.
*: Appears when the NAVpilot-700 series Autopilot is installed in the TZT network.
*: Appears when the NAVpilot-700 series Autopilot is installed in the TZT network.
Push the joystick.
Push the joystick.
Select a main menu item.
Select a main menu item.
Track Rec.
Event
Lat/Lon
Select an item.
Select an item.
3D
◄ Chart
N 26°27.027'; W 80°56.264'
53.97 NM
/
230.6°
Go To
New Point
Select an item.
Select an item.
New Route
More...
Select a display.
Select a display.
Zoom out
Zoom out
N 26°27.027'; W 80°56.264'
53.97 NM
/
230.6°
Go To
New Point
New Route
[New Point] is selected.
More...
N 26°27.027'; W 80°56.264'
53.97 NM
/
230.6°
Go To
New Point
Select [Go To].
New Route
More...
ENT
No
or
Start to go to a point.
Activate the selected item.
Activate the selected item.
Select a sub menu item
Select a sub menu item
with the cursor.
with the cursor.
ENT
Activate the selected item.
Activate the selected item.
ENT
Activate the selected item.
Activate the selected item.
Open the selected display.
Open the selected display.
Scroll mode operation
You can pan the display (Plotter/Weather/Radar display), shift the range and scroll back the
You can pan the display (Plotter/Weather/Radar display), shift the range and scroll back the
picture (Fish finder display) with the joystick. To switch to the scroll mode, press the CURS•SCRL
picture (Fish finder display) with the joystick. To switch to the scroll mode, press the CURS•SCRL
key. In the scroll mode, the cursor disappears.
key. In the scroll mode, the cursor disappears.
CURS
•
SCRL
Switch to the scroll mode.
Switch to the scroll mode.
Note: In the cursor mode, you can pan the display by moving the cursor to the edge of the screen.
Note: In the cursor mode, you can pan the display by moving the cursor to the edge of the screen.
This function is available in the full screen Plotter/Weather/Radar display.
This function is available in the full screen Plotter/Weather/Radar display.
How to put an event mark
ENT
ENT
Open the RotoKey
Open the RotoKey
The point is put
on the screen.
or
Push the joystick.
Push the joystick.
ENT
330
30
320
40
310
50
300
60
290
70
280
80
270
90
260
100
250
110
120
240
230
130
220
140
210
150
Operate the joystick.
Operate the joystick.
Select [Event].
Select [Event].
menu.
menu.
TM
TM
Creating Event
Select an event mark.
Cancel
PUB. NO. E42-01403-A1
(1405, REFU) MCU-002
CENTER
Center Vessel
Center Radar
Cancel Hist.
◄ Orientation
Track Rec.
ENT
Event
Lat/Lon
Activate [Event].
Activate [Event].
3D
ENT
The selected event mark
is put on the screen.
00017941910
Advertisement
