Hitachi CP-X3030WN Operating Manual page 60

OPTION menu
Item
MY BUTTON
(continued)
MY SOURCE
SERVICE
(continued on next page)
60
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
• FILTER RESET: Displays the filter time reset confirmation dialogue (
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (
• AV MUTE: Turns the picture and audio on/off.
• RESOLUTION: Turns on/off the RESOLUTION dialog (
• MIC VOLUME: Turns on/off the MIC VOLUME dialog (
• ECO MODE: Changes the ECO MODE (
• SAVER MODE: Changes the SAVER MODE (
Using ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
You can use this function not only for document cameras but also
computers and other equipment.
VIDEO COMPUTER IN1
S-VIDEO HDMI
Selecting this item displays the SERVICE
menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the ENTER
button on the remote control to execute
the item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
The HIGH is the mode for use at highlands etc. If the projector is used
at an altitude of about 1600 m (5250 feet) or higher, select HIGH.
Otherwise, select NORMAL. Note that the projector is noisier when the
HIGH is selected.
HIGH NORMAL
Description
54) appear or disappear.
COMPUTER IN2
USB TYPE B
34).
45).
49).
47).
47 ECO MODE).
LAN
USB TYPE A
58).