Hitachi CP-X3030WN Operating Manual page 13

Connecting with your devices (continued)
Access
point
USB
wireless
adapter
(optional)
USB
storage
device
CAUTION
to obtain the consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive
voltage.
►The designated USB wireless adapter that is sold as an option is required to
use the wireless network function of this projector.
►Before removing the USB storage device from the port of the projector, be
sure to use the REMOVE USB function on the thumbnail screen to secure your
data ( 88).
►Do not use any extension cable or device when connecting the adapter to the
projector. Before you insert or pull out the USB wireless adapter from the projec-
tor, turn off the power of the projector and pull out the power cord's plug from the
outlet. Do not touch the USB wireless adapter while the projector is receiving AC
power.
►To connect both the LAN cable and USB device to the projector, use a LAN
cable that is fl at on the side where the plug's wire is visible. Otherwise, both of
them cannot be connected correctly, or the wire may break (malfunction).
NOTE • If an oversized USB storage device blocks the LAN port, use a USB
extension cable to connect the USB storage device.
(continued on next page)
► Before connecting the projector to a network system be sure
Computer
Setting up
External device
13