Searching An Input Signal - Hitachi CP-X3030WN Operating Manual

Selecting an input signal(continued)
Press the MY SOURCE / DOC. CAMERA button on
1.
the remote control. The input signal will be changed
into the signal you set as MY SOURCE (
● This function also can use for document camera. Select the
input port that connected the document camera.

Searching an input signal

Press SEARCH button on the remote control.
1.
The projector will start to check its input ports as below in
order to fi nd any input signals.
When input signal is detected, the projector will stop
searching and display the image. If no signal is found,
the projector will return to the state selected before the
operation.
COMPUTER IN1
VIDEO
S-VIDEO
● While ON is selected for AUTO SEARCH item in OPTION menu (
projector will keep checking the ports in above order repeatedly till an input
signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
COMPUTER IN2
HDMI
MY SOURCE /
DOC. CAMERA button
60).
LAN
USB TYPE A
USB TYPE B
Operating
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
OFF DOWN
MY BUTTON
KEYSTONE MUTE
SEARCH button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT
AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
OFF DOWN
MY BUTTON
MUTE
KEYSTONE
56), the
25