EXPRELIA
7.5.
Steam pump
7.6.
Coffee pump
7.7.
Turbine
7.8.
Power card
7.9.
Steam boiler
Saeco International Group
1
1
Lift the turbine out of the casing assembly and remove the electrical and
water circuit connections
1
2
2
1
1
Slide out the two pump supports (highlighted)
fixed to the housing and disconnect the electrical
and water circuit connections
1) Loosen the screws as illustrated and remove all
electrical connections from the component support
2) Extract the pump from the supports and
disconnect it from the electrical and water circuit
connections
2
1-2)Unscrew the screws shown
3)Unhook the boiler, disconnect the
electrical and water circuit connections
3
3
Rev. 00 / June 2010
07 DISASSEMBLY
1)Remove the card cover by raising
it
2)Loosen the screws as illustrated
and remove the PWR card
extracting the electrical connections
Page
04
/ 09