Software Version; Brew Unit - Philips Saeco Exprelia Series Service Manual

EXPRELIA
Software
D:64 E:8
*
P Off
* *
KEYBOARD
Espr Caf
Clean
Long Spec
* *
This screen corresponds to the management of the area inside the front hatch.
BREW
Work Home
Dreg- Dreg+
Stop 10
DDr H/W Door
Saeco International Group
xx.yy.zz
• (xx.yy.zz)
• (D and E)
Debug msg
and must be 64 and 8.
• P OFF
*
*
machine is switched on
• Debug msg:
for the next restart only
* *
*
Cappucc
This is the button test page: each beverage corresponds to a box on the
display that changes colour when the corresponding button is pressed (e.g.:
ESPRESSO)
Stdby
* *
Operation:
• WORK
• STOP
UNIT • HOME
• DREG UP
mA: xx
• DREG DOWN
Indicators:
• mA
consumed by the unit when moving. Its value must not exceed 300 mA
• H/W
Pres
position
• Pres
• DDr
• Door

Software version

software version loaded onto the machine
are values providing information on the memory settings
: if active it enables immediately going onto Standby when the
if active it enables the automatic dosing debug messages
Keyboard

Brew Unit

: if pressed, switches the unit into its work position
: if pressed, stops the unit instantly
: if pressed, switches the unit into its Home position
: increases the coffee dregs counter
: decreases the coffee dregs counter
: indicates moment by moment the maximum current (in mA)
: becomes active (illuminated) when the unit reaches a "Work"
: if active, this indicates that the unit is inserted
: if active, this indicates that the dregs counter is inserted
: if active, this indicates that the front hatch is closed
Rev. 00 / June 2010
05 TROUBLESHOOTING
Page 02 / 07