Machine Indications - Philips Saeco Exprelia Series Service Manual

EXPRELIA
MAINTENANCE
This function lets you set all the functions so that machine maintenance is managed better
MAINTENANCE
METERS FOR
UNIT CLEANING
CARAFE CLEANING
DESCALING
CLEAN CARAFE
OFF
ON
FACTORY SETTINGS
This function allows the factory values to be reset.
FACTORY SETTINGS
Restoring the factory parameters deletes all the personal parameters set beforehand.
3.2.

Machine indications

INSERIRE
COPERCHIO CHICCHI
ADD COFFEE
INSERIRE GRUPPO
Saeco International Group
This function is used to view how many products have been prepared for each single type of beverage
since the last reset
This function is used to run the washing cycle for the brewing unit
This function lets you run the washing cycle for the carafe used for making beverages containing milk
This function is used to run the descaling cycle
This function is used to set the time since the last beverage dispensing when the machine will go onto
standby. The default time setting is 60min
The self-cleaning function is disabled
The self-cleaning function is enabled
Close the coffee bean hopper
lid to enable delivery of any
beverage
Fill the coffee
container
Insert the brewing unit
in its correct location
SVUOTARE
CONTENITORE FONDI
CHIUDERE SPORTELLO
FRONTALE
RIEMPIRE
SERBATOIO ACQUA
Rev. 00 / June 2010
03 USER INSTRUCTIONS
Remove the dregs drawer.
Note: The dregs drawer must
only be emptied when requested
by the machine and with the
machine on.
For the machine to become
operative, the service hatch
must be closed
Take out the tank and fill it with
fresh drinking water
Page / 05
03