Advertisement
Assembly
figure 1
pre-drilled holes
figure 2
figure 3 - axle guide
6
Assembling the gogo Kidz Travelmate
*You will need a Phillips Head Screwdriver or electric drill for
handle screws
1. Insert handle into plate. (figure 1)
2. Align pre-drilled holes at the bottom of the handle with holes in
front of plate (It is okay if holes do not align perfectly they are
to be used as a guide). (figure 2)
3. Insert handle screws in front of plate with the screwdriver.
4. Pull up on handle to ensure it is secured.
5. Insert axle through opening at bottom of plate. (figure 3)
6. Slide wheel with quick release spring locks on to each side of
axle, push on spring until wheel snaps in place.
7. Test connection by pulling on wheels to ensure they are secured.
RECOMMENDED CAR SEATS
The gogo Kidz® Travelmate will accommodate most convertible
and toddler car seats. Please refer to the list of recommended car
seats, located on the back of the product box, to ensure a safe fit.
You may also visit www.gogobabyz.com for our compatibility list.
Go-Go Babyz is continually testing new seats with the gogo Kidz
and will update our web site frequently whenever we discover a
new match or to confirm which seats will not fit with the gogo Kidz.
If you do not see your car seat listed on the product box, please
check our web site (www.gogobabyz.com) to see if we have had to
opportunity to test it with the gogo Kidz.
ASSEMBLING YOUR GOGO KIDZ TRAVELMATE
figure A
Arrows pointing to car seat ribs
Hide quick links:
Advertisement
