Table of Contents
Advertisement
2.
Insert the contact end of the battery first, and then
gently push the battery into place.
3.
Replace the battery compartment cover and press
until it snaps into place, making sure all the locking
tabs are seated and there are no gaps around the
cover.
Removing the Battery
1.
Make sure the power is off so that you don't lose
any stored numbers or messages.
Remove the battery compartment cover. (See
2.
step 1 of "Installing the Battery.")
3.
Lift the battery out at the notch just below the
camera lens.
WARNING:
Do not handle a damaged or leaking Li-Ion
battery as you can be burned.
2A. Device Basics
19
Advertisement
Table of Contents
