Table of Contents
Advertisement
Turning Wi-Fi On and Connecting to a
Wireless Network
1.
>
Press
and tap
Wireless & networks
2.
Select the
Wi-Fi
device will scan for available wireless networks.
3.
Tap
Wi-Fi settings
settings (Open network or Secured with WEP) of
detected Wi-Fi networks are displayed in the Wi-Fi
networks section.
4.
Tap a Wi-Fi network to connect. If you selected an
open network, you will be automatically connected
to the network. If you selected a network that is
secured with WEP, enter the key, and tap
Depending on the network type and its security
settings, you may also need to enter more information
or choose a security certificate.
168
3B. Web and Data Services
Settings >
.
check box to turn Wi-Fi on. The
. The network names and security
When your device is connected to a wireless network,
the Wi-Fi icon (
you the approximate signal strength (number of bands
displayed).
If
Network notification
icon (
) appears in the status bar whenever the
device detects an available wireless network within
range.
Note:
The next time your device connects to a previously
accessed secured wireless network, you will not be
prompted to enter the WEP key again, unless you reset
your device to its factory default settings.
Wi-Fi networks are self-discoverable, which means no
additional steps are required for your device to connect
to a Wi-Fi network. It may be necessary to provide a
.
Connect
user name and password for certain closed wireless
networks.
) appears in the status bar and tells
in Wi-Fi settings is enabled, this
Advertisement
Table of Contents
