Table of Contents
Advertisement
Note: You can easily damage the microSD card by improper operation. Please be careful when inserting, removing, or
handling the microSD card.
Make sure your battery is fully charged before using the microSD card. Your data may become damaged
or unusable if the battery runs out while using the microSD card.
Inserting the microSD Card
1.
With the device turned off, insert your fingernail into the slot at the top left of the battery compartment
cover and lift gently to remove.
2.
Lift the battery from the notches on the upper left and right sides of the battery compartment, and then
set it aside.
3.
Locate the latch at the bottom-right corner of the battery compartment, and then lift the latch to unlock
the microSD card slot.
4.
Carefully insert the microSD card into the slot (a), and then press the latch (b) to lock the slot and secure
the card in place.
Re-install the battery and the back cover. For more information on how to remove and re-install the back
5.
cover and battery, see "Battery and Charger" on page 12.
Latch
b
Latch
a
microSD card
2G. microSD Card
73
Advertisement
Table of Contents
