Table of Contents
Advertisement
Adjusting the Brightness
By default, the screen brightness automatically adjusts depending on the surrounding lighting conditions.
To manually adjust screen brightness
Press
and tap
1.
>
2.
Tap
Brightness
and then clear the
3.
Drag the slider to adjust the brightness.
Tap
.
4.
OK
Changing the Screen Orientation
By default, the screen orientation automatically changes when the device is rotated. To disable automatic
screen orientation:
Press
and tap
1.
>
2.
Clear the
Orientation
Note: Not all application screens support automatic rotation.
The screen orientation automatically changes to landscape mode when you turn the device counterclockwise 90
degrees. If you turn the device clockwise 90 degrees, the screen orientation will not change to landscape mode.
Recalibrating the Screen
Recalibrate the screen if you feel that the screen orientation does not respond properly to the way you hold
the device.
1.
Press
and tap
>
Place the device on a flat surface and then tap
2.
After the recalibration process, tap
3.
Location Settings
Your device is equipped with a Location feature for use in connection with location-based services.
The Location feature allows the network to detect your position. Turning Location off will hide your location
from everyone except 911.
Note: Turning
Location
applications and services easier to use. Turning
except 911, but will not hide your general location based on the cell site serving your call. No application or service
may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.
To enable your device's Location setting feature:
Press
and tap
1.
>
Read the Location disclaimer and then tap
2.
3.
Press
.
When you turn the Location setting feature on, the device displays the
turn Location setting off, the device displays the
30
2B. Settings
Settings > Sound & display
Automatic brightness
Settings > Sound & display
check box and press
Settings > Sound & display > G-Sensor calibration
.
OK
on will allow the network to detect your position using GPS technology, making some Sprint
Settings > Location > Location setting
ON
.
check box.
.
.
.
Calibrate
off will disable the GPS location function for all purposes
Location
.
.
icon.
.
icon on the status bar. When you
Advertisement
Table of Contents
