Table of Contents
Advertisement
32 Phone Basics
1.2 Installing the Battery and Storage Card
Always turn off your phone before installing or replacing the battery
and storage card. You also need to remove the back cover before you
can install the battery and storage card.
Note
The microSD card is pre-installed in the phone.
To remove the back cover
1. Make sure the phone is turned off.
2. Hold the device securely with the
front facing down.
3. With your thumb or finger, lift up
the top (from the notch) of the
back cover.
Battery
Your phone comes with a rechargeable Lithium-ion battery and is
designed to use only manufacturer-specified original batteries and
accessories. Battery performance depends on many factors, including
network configuration, signal strength, the temperature of the
environment in which you operate your phone, the features and/or
settings you select and use, items attached to connecting ports, and
your voice, data, and other program usage patterns.
Warning!
To reduce risk of fire or burns:
• D o not attempt to open, disassemble, or service the battery
pack.
• D o not crush, puncture, short external contacts, or dispose of in
fire or water.
• Do not expose to temperatures above 140
• Replace only with the battery pack designated for this product.
• R ecycle or dispose of used battery as stipulated by local
regulations.
F (60
C).
o
o
Advertisement
Table of Contents
