Table of Contents
Advertisement
142 Getting Connected
4.
Select the name of the
headset, and select Next.
5.
In Passcode, enter the
alphanumeric passcode for the
Bluetooth headset, then select
Next. The passcode is usually
"0000" or "1234". If these do
not work, then refer to headset
documentation for the code.
A message will appear saying that your phone has connected to the
headset, select OK.
6.
Enter the display name for the headset and select Next.
7.
Select the check boxes for the Wireless Stereo (if available) and
Hands Free services, and select Done.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on
and repeat steps 1 to 2 above. Select the stereo headset and select Menu >
Set as Wireless Stereo.
Advertisement
Table of Contents
