Triplex H.264 4/8/16CH DVR
2.8.8. FIRMWARE UPGRADE
Plug the USB device into USB port on the front panel of DVR.
Press YES to start firmware update.
After completed the updated, DVR will reboot automatically.
NOTE 1: Please format USB flash memory with FAT32.
NOTE 2: Please STOP recording when firmware upgrade is processing.
2.8.9. LOAD DEFAULT
Press SET button to entry CONFIGURE SET screen..
♦
LOAD SETUP FROM DEFAULT: Press SET button to load the setting back
to factory default.
♦
LOAD SETUP FROM USB: Press SET button to load the pen drive setting to
the current DVR.
♦
BACKUP SETUP TO USB: Press SET button to backup the current DVR
setting into pen drive.
Make sure to load default and press『YES』.
2.8.10. DAYLIGHT SAVING TIME SETUP
Set the Daylight saving mode as Disable, Manual or Auto.
Disable Daylight saving mode:
Digital Video Recorder
23