Advertisement
DHP Air Compressor Unpacking and Installation (cont.)
Air Line Connection
6) Locate the Gray burst proof 3/8" tubing (attached to the exhaust/supply side of the Dental Air
Compressor) and attach it to the air line supplying air to the operatories. See diagram below.
IT IS STRONGLY RECOMMENDED THAT A LICENSED ELECTRICIAN COMPLETE
THE WIRING INSTALLATION OF ANY DHP DENTAL AIR COMPRESSOR
Electrical Connections
1) The DHP one horsepower Dental Air Compressor is shipped as a standard 120 volts (unless
it is specified in writing a 240 volt model is required). The DHP two horsepower Dental Air
Compressor is shipped as a standard 240 volts (the two horsepower Dental Air Compressor is
available in 240 volt only).
2) A wiring schematic for the DHP one horsepower is shown below and two horsepower Dental
Air Compressor is shown on the following page as well as on the inside of the DHP Dental Air
Compressor's control box.
Advertisement
