Advertisement
DHP Air Compressor Unpacking and Installation - Section 6
The DHP one horsepower dental air compressor weighs 200 lbs..
The DHP two horsepower dental air compressor weighs 285 lbs..
1) Open the top of the Dental Air Compressor crate with a knife, remove all the internal packing
material and Dental Air Compressor accessories package and set aside - DO NOT DISCARD
ANY OF THE PACKING MATERIAL OR PACKAGING PRODUCTS UNTIL THE DENTAL AIR
COMPRESSOR HAS BEEN COMPLETELY INSTALLED.
2) With Dental Air Compressor crate on the floor use a knife to open the box. Do not attempt
to lift the Dental Air Compressor simply dislodge the cardboard crate from the wooden pallet.
3) With the cardboard crate removed from the wooden pallet locate the four bolts attaching the
Dental Air Compressor to the wooden pallet and using a 7/16" open wrench remove the bolts
from the pallet.
4) Carefully slide the Dental Air Compressor off the wooden pallet and situate it in the desired
location.
5) Locate the Dental Air Compressor accessories plastic bag housing the four rubber isolation
feet and attach them to the Dental Air Compressor. See diagram below.
Advertisement
