Volume Setting; Programme Selection; Av Mode; Operation With The Remote Control - Silvercrest 32111 User Manual

Volume Setting

• Touch the " " or"
increase or decrease volume. A volume level scale
(slider) will be displayed on the screen.

Programme Selection

• Touch the " P/CH " oder "P/CH
channel. Touch the "P/CH
next programme or the "P/CH
previous programme.

AV Mode

• Touch the " TVAV" button. The source OSD will be
displayed in a few second. By repeatedly touching the
"TV / AV" button or by touching the "P/CH " oder "P/CH
" button, you could jump through the available sources.
NOTE: If you jumped to the desired source, the
device will switch automatically with a short delay to
the source.

Operation with the Remote Control

• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
• Press " V+" button to increase the volume. Press "V-"
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press " P -" button to select the previous
programme.
• Press " P +" button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
directly, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the  rst digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
"buttons buttons to
" buttons to change
" button to select the
" button to select the
English - 9 -

First Time Installation

IMPORTANT: Ensure that the aerial is connected
before switching on the TV for the first time
installation.
• When the TV is operated for the  rst time, installation
wizard will guide you through the process. First,
language selection screen will be displayed:
• Use " " or " " buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language, "
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
• By pressing " " or " " button, select the country
you want to set and press " " button to highlight
Teletext Language option. Use " " or " " button
to select desired Teletext Language.
• Press " " button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.
• Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
Welcome!" screen will