Switching Between Channels; Recall The Last Watched Channel; Adjusting The Volume; Selecting The Display Language - Silvercrest LT 710 User Manual And Service Information

SilverCrest LT 710 English

Switching between Channels

Press the CH+ button (7) on the remote control or the button CH+ (30) on the
front panel of the device to switch the programmes upwards.
Press the CH- button (9) on the remote control or the button CH- (29) on the
front panel of the device to switch the programmes downwards.

Recall the Last Watched Channel

Press the RETURN button (13) to recall the last watched channel. This
function allows you to toggle between the last two channels you have been
watching.

Adjusting the Volume

Press the VOL+ button (19) on the remote control or the button VOL+ (33) on
the front panel of the device to increase the audio volume.
Press the VOL- button (8) on the remote control or the button VOL- (32) on
the front panel of the device to decrease the audio volume.
A status bar will display during the adjustment.
You can also mute the sound completely by pressing the MUTE button (1) on
the remote control. On the upper left corner of the screen an icon showing a
dashed-out loudspeaker will appear.
Press the MUTE button (1) again or any of the volume adjustment buttons to
enable the audio output again. The displayed icon will disappear.

Selecting the Display Language

You can use the LANGUAGE button (2) to toggle the display language
easily. Each press of the button will toggle cyclically to the next available
language. If necessary, press the button as many times as necessary until
your preferred language displays.
17