Maintenance; Warranty - Salus ERT20RF Instruction Manual

Electronic thermostat with rf
Hide thumbs Also See for ERT20RF:
Table of Contents

Advertisement

MAINTENANCE

The ERT20RF electronic thermostat requires no special maintenance. Periodically, the outer casing can
be wiped clean using a dry cloth (please DO NOT use solvents, polishes, detergents or abrasive cleaners,
as these can damage the thermostat).
There are no user serviceable parts within the unit.
Should the ERT20RF electronic thermostat fail to function correctly, check:
• The batteries are the correct type, fitted correctly and are
not exhausted - fit new batteries if in doubt. LED will flash continuously when battery power is low.
• Heating or Cooling system is switched on.
• The ERT20RF receiver is switched on. Note in the event of the receiver being switched off or a power
cut the receiver LED will flash for 10 minutes. The LED will eventually stop flashing and return to
normal. Check jumper on the rear are set to your required application.

WARRANTY

SALUS Controls warrants that this product will be free from any defect in materials or workmanship,
and shall perform in accordance with its specification, for a period of two years from the date of
purchase. SALUS Controls sole liability for breach of this warranty will be (at its option) to repair or
replace the defective product.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents