Change General Settings; Change Audio Settings; Change Video Settings - Philips HTS3530 User Manual

Change general settings

1
Press SETUP .
2
Select [General Setup] , then press OK .
3
Select and adjust the following settings:
•
[Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
•
[Display Dim] : Changes the brightness
of the display panel.
•
[OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a speciÀ c time.
•
[Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
•
[DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to conÀ rm your choice.
Note
•
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.

Change audio settings

1
Press SETUP .
2
Select [Audio Setup] , then press OK .
3
Select and adjust the following settings:
• [Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
•
[Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
• [HDMI Audio] : Enables or disables
HDMI audio output for the TV.
•
[Audio Sync] : Sets a delay for audio
output when you play a video disc.
4
Press OK to conÀ rm your choice.
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.

Change video settings

1
Press SETUP .
2
Select [Video Setup] , then press OK .
3
Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
•
[TV Display] : Selects a picture display
format to À t the TV screen.
•
[Progressive] : Enables or disables
progressive scan mode.
•
[Picture Settings] : Selects a
predeÀ ned color setting.
•
[HD JPEG] : Enables or disables display
of high deÀ nition JPEG images.
• [HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
4
Press OK to conÀ rm your choice.
Note
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
• Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For settings related to progressive or
component video, the TV must be connected
through Component Video.
EN 13