Change general settings
1
Press
SETUP .
2
Select [General Setup] , then press OK .
3
Select and adjust the following settings:
•
[EasyLink Setup] : Sets up EasyLink to enjoy
easy controls of all the HDMI CEC compliant
devices using a single remote control (see
'Use Philips EasyLink' on page 12 ) .
•
[Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
•
[Display Dim] : Changes the brightness of
the display panel.
•
[OSD Language] : Selects the on-screen
display menu language.
•
[Screen Saver] : Enables or disables screen
saver mode. If enabled, the screen enters
idle mode after 10 minutes of inactivity (for
example, in pause or stop mode).
•
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby after
a speciÀ c time.
•
[DivX® VOD Code] : Displays the DivX
VOD registration code for the home theater.
4
Press OK to conÀ rm your choice.
Note
•
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Change audio settings
1
Press
SETUP .
2
Select [Audio Setup] , then press OK .
3
Select and adjust the following settings:
•
[Speakers Volume] : Sets the volume of
each speaker to obtain the ideal audio balance.
•
[Speakers Delay] : Sets the delay time for
center and rear speakers to obtain an equal
audio transmission from all the speakers.
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.
14
EN
•
[CD Upsampling] : Converts the music
CD to a higher sampling rate using
sophisticated digital signal processing
for better sound quality.
•
[Audio Sync] : Sets a delay for audio
output when you play a video disc.
4
Press OK to conÀ rm your choice.
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
CD upsampling is only available in stereo
mode.
Change video settings
1
Press
SETUP .
2
Select [Video Setup] , then press OK .
3
Select and adjust the following settings:
•
[TV System] : Selects a TV system that
is compatible with the TV.
•
[TV Display] : Selects a picture display
format to À t the TV screen.
•
[Screen Fit] : Selects a full screen
format that best À ts to the TV screen.
•
[Picture Settings] : Selects a
predeÀ ned color setting.
•
[HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
•
[Progressive] : Enables or disables
progressive scan mode.
4
Press OK to conÀ rm your choice.
Note
•
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For settings related to progressive or
component video, the TV must be connected
through Component Video.