Play From Radio; Play Audio From Tv Or Other Devices; Create Mp3 Audio À Les - Philips HTS3530 User Manual

• [TT Time] : Title time.
•
[Ch Time] : Chapter time.
•
[Disc Time] : Disc time.
•
[Track Time] : Track time.
3
Enter the time of the scene, then press OK .
Repeat play a speciÀ c section
Select sections of audio or video for repeat
playback.
1
During playback, press
2
Select [Repeat AB] in the menu.
3
Press OK to mark the start point.
4
Press OK again to mark the end point.
» Repeat play starts.
• To cancel repeat A-B, press
[Repeat AB] > [Off] , then press OK .
Note
• Repeat play is only possible within a track/
chapter.

Play from radio

The home theater can store up to 40 radio
stations.
1
Check that the FM antenna is connected.
2
Press RADIO .
» " AUTO INSTALL...PRESS PLAY ' appears
on the display panel if you have not
installed any radio stations. Press
3
Press the following buttons to control play:
Button Action
Selects a preset radio station.
/
/ Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for À ve
seconds to reinstall radio stations.
INFO .
INFO , select
.
Note
• AM and digital radio are not supported.
•
If no stereo signal is detected, you are
prompted to install the radio stations again.
•
For the best reception, place the antenna away
from the TV or other sources of radiation.
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
1
Press RADIO .
2
Press .
3
Press and hold
or 'GRID 10' (100 kHz) is displayed.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select
the audio output of the connected device (see
'Connect audio from TV or other devices' on
page 8 ) .
Create MP3 audio À les
Use the home theater to convert audio CDs into
MP3 audio À les.
1
Insert an audio CD (CDDA/HDCD) into
the home theater.
2
Connect a USB storage device to the home
theater.
3
When audio is played, press CREATE MP3 .
4
Select [Yes] and press OK to conÀ rm.
until 'GRID 9' (50 kHz)
EN 11