Using The Stopwatch; Using The Alarm; Using The Countdown Timer - Casio 5114 Operation Manual

Manual Save 1
Hour : Minutes
1 second
Month
Record name
Day Altitude
Cumulative Descent (DSC)
Cumulative recording
start month and day
1 second
Cumulative descent
3. After you are fi nished viewing data, use D to exit the Data Recall Mode.
• -.-- will be displayed if data has been deleted or if there is no corresponding data due to error, etc. In
such cases, cumulative ascent (ASC) and cumulative descent (DSC) values will show zero.
• When the cumulative ascent (ASC) or cumulative descent (DSC) exceeds 99,995 meters (or 327,980
feet), the applicable value will restart from zero.
To delete a single altitude record
1. In the Data Recall Mode, use A and C to scroll through records until the one you want to delete is
displayed.
2. Hold down E for about two seconds until each of the following steps occurs.
Hold CLR appears on the digital display. ➝ CLR appears.
•
• This deletes the record you displayed in step 1.
Release E after CLR appears on the digital display.
•
• Deleting a manual save record shifts all of the records following it up one position.
To delete all altitude records
In the Data Recall Mode, hold down E for about fi ve seconds until each of the following steps occurs.
Hold CLR appears on the digital display. ➝ CLR appears. ➝ Hold ALL appears. ➝ CLR ALL
•
appears.
• This deletes all of the records currently in memory.

Using the Stopwatch

The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use D to select the Stopwatch Mode (ST) as shown in "Selecting a
Mode".
• About one second after ST appears on the digital display, the display
will change to show the stopwatch time.
To perform an elapsed time operation
A
Seconds 1/100 Seconds 1/100 Start
second second
Minutes Minutes
To pause at a split time
A
Start
To measure two fi nishes
A C
Start Split
First runner fi nishes.
Display time of fi rst
runner
Note
• The Stopwatch Mode can indicate elapsed time up to 59 minutes, 59.99 seconds.
Once started, stopwatch timing continues until you press C to stop it, even if you exit the Stopwatch
•
Mode to another mode and even if timing reaches the stopwatch limit defi ned above.
• Exiting the Stopwatch Mode while a split time is frozen on the digital display clears the split time and
returns to elapsed time measurement.

Using the Countdown Timer

The countdown timer can be confi gured to start at a preset time, and sound an alarm when the end of the
countdown is reached.
To enter the Countdown Timer Mode
Use D to select the Countdown Timer Mode (TR) as shown in "Selecting a
Mode".
• About one second after TR appears on the digital display, the display
will change to show the current countdown start time.
To specify the countdown start time
1. Enter the Countdown Timer Mode.
• If a countdown is in progress (indicated by the seconds counting
down), press A to stop it and then press C to reset to the current
countdown start time.
Countdown time Countdown time If a countdown is paused, press C to reset to the current
•
(Minutes, seconds) (Minutes, seconds)
countdown start time.
2. Hold down E until each of the following steps occurs.
Hold SET appears on the digital display. ➝ The current countdown
•
start time fl ashes.
3. Use A (+) and C (–) to change the minute setting.
4. Press E to exit the setting screen.
To perform a countdown timer operation
A A
Start Stop
Operation Guide 5114
Manual Save 14 High Altitude (HI)
1 second
Altitude High altitude
Cumulative Ascent (ASC) Low Altitude (LO)
Cumulative recording
start month and day
1 second
Cumulative ascent
Low altitude
A A
A
Stop (Restart) (Stop)
C A
C
Split Split release Stop
(SPL displayed)
A C
Stop Split release
Second runner Display time of
fi nishes. second runner
A A
(Restart) (Stop)
• Before starting a countdown timer operation, check to make sure that a countdown operation is not in
progress (indicated by the seconds counting down). If it is, press A to stop it and then C to reset to
the countdown start time.
• An alarm sounds for fi ve seconds when the end of the countdown is reached. This alarm will sound in
1 second
all modes. The countdown time is reset to its starting value automatically when the alarm sounds.
To stop the alarm
Press any button.

Using the Alarm

1 second
Alarm time Alarm time Alarm Alarm
(Hour : Minutes) (Hour : Minutes) number number
To set an alarm time
Alarm ON/OFF Alarm ON/OFF
indicator indicator
3. Press D to move the fl ashing between the hour and minute settings.
4. While a setting is fl ashing, use A (+) and C (–) to change it.
• When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no
indicator) or p.m. (P indicator).
5. Press E to exit the setting screen.
To test the alarm
In the Alarm Mode, hold down A to sound the alarm tone.
To turn an alarm and the Hourly Time Signal on and off
1. In the Alarm Mode, use A and C to select an alarm or the Hourly Time Signal.
2. When the alarm or the Hourly Time Signal you want is selected, press B to toggle it between (ON) and
off (OFF).
• The alarm on indicator (when any alarm is on) and the hourly time signal on indicator (when the
hourly time signal is on) are shown on the digital display in all modes.
C
Reset
C
Reset
To stop the alarm
Press any button.
C
Checking the Current Time in a Different Time Zone
Reset
You can use the World Time Mode to view the current time in one of 29 time zones (29 cities) around the
globe. The city that is currently selected in the World Time Mode is called the "World Time City".
• You also can swap the current World Time City and Home Time City in the World Time Mode.
Currently selected Currently selected
World Time City World Time City
Current time in the Current time in the
currently selected currently selected
World Time City World Time City
To specify standard time or daylight saving time (DST) for a city
DST indicator DST indicator
C
Reset
You can set fi ve independent daily alarms. When a daily alarm is turned
on, an alarm tone will sound for about 10 seconds each day when the
time in the Timekeeping Mode reaches the preset alarm time. This is true
even if the watch is not in the Timekeeping Mode.
You can also turn on an Hourly Time Signal, which will cause the watch
to beep twice every hour on the hour.
To enter the Alarm Mode
Use D to select the Alarm Mode (AL) as shown in "Selecting a Mode".
• About one second after AL appears on the digital display, the display
will change to show an alarm number (−1 through −5) or the
indicator. The alarm number indicates an alarm screen.
when the Hourly Time Signal screen is on the digital display.
• When you enter the Alarm Mode, the data you were viewing when you
last exited the mode appears fi rst.
1. In the Alarm Mode, use A and C to scroll through the alarm (–1
through –5) until the one whose time you want to set is displayed.
−1 −2
−5
2. Hold down E until each of the following steps occurs.
Hold SET appears on the digital display. ➝ The current setting
•
fl ashes.
• This is the setting screen.
Hourly time signal
Alarm on indicator
on indicator
To enter the World Time Mode
Use D to select the World Time Mode (WT) as shown in "Selecting a
Mode".
• WT appears on the digital display and the second hand moves to the
city code of the currently selected World Time City.
To view the time in another time zone
In the World Time Mode, use A to move the second hand to a city code
in the zone whose time you want to view.
Keep pressing A until the second hand is pointing to the city code
•
you want.
• The current time in time zone of the currently selected city code is
shown in the digital display.
1. In the World Time Mode, use A to move the second hand to the city
code whose standard time/daylight saving time setting you want to
change.
Keep pressing A until the second hand is pointing to the city code
•
you want.
2. Hold down E until each of the following steps occurs.
Hold appears on the digital display. ➝ Hold disappears.
•
• This toggles the city code you selected in step 1 between Daylight
Saving Time (dSt indicator displayed) and standard time (dSt
indicator not displayed).
• Using the World Time Mode to change the DST setting of the city
code that is selected as your Home City also will change the
Timekeeping Mode time DST setting.
• Note that you cannot switch between standard time/daylight saving
time (DST) while UTC is selected as the World Time City.
• The standard time/daylight saving time (DST) setting affects only the
currently selected time zone. Other time zones are not affected.
is shown
−3
−4
8