BenQ MX666 User Manual page 48

Function
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
Color
Temperature
Fine Tuning
3D Color
Management
Reset Picture
Settings
Quick Auto
Search
48 Operation
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 32
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
for details.
Adjusts the brightness of the image. See
page 33 for details.
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 33
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 33
This function is only available when a Video, S-Video or Component Video
signal is selected.
Adjusts the red and green color tones of the image. See
Tint" on page 33 for details.
This function is only available when a Video or S-Video signal is selected.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 33
This function is only available when a Video, S-Video or Component Video
signal is selected.
See "Adjusting Brilliant Color" on page 33
See "Selecting a color temperature" on page 33
See "Setting a preferred color temperature" on page 34
See "3D Color Management" on page 34
See "Resetting current or all picture modes" on page 35
See "Switching input signal" on page 28
Description
for details.
"Setting the User 1/User 2 mode" on page 32
"Adjusting Brightness" on
for details.
for details.
for details.
for details.
for details.
"Selecting a
for details.
"Adjusting
"Adjusting
for details.
for details.
for details.